Featured models

Browse by date
β J F M A M J J A S O N D
1999                        
2000                        
2001                        
2002                        
2003                        
2004                        
2005                        
2006                        
2007                        
2008                        
2009                        
2010                        
2011                        
2012                        
2013                        
2014                        
2015                        
2016                        
2017      

Chat Page News
Wednesday 26th April 2017

Please bookmark http://chat.palsite.com/chat_page.py as the new URL.

previous new post   refresh  next
Karl webb
Wednesday 2nd March 2016
9:19 am U.K.

Webby179@hotmail.com

It's the plate at the bottom of the camera, in between the shoulder pad and rear connections plugs.

Matt Quinn
Monday 29th February 2016
1:40 pm U.K.

matt@matt-quinn.com

The short answer to that is no... These are now very much 'vintage' cameras and as such obsolete. Parts would need to be obtained from a scrap unit.

By 'back panel' - you surely son't mean the connector panel?

Karl webb
Friday 26th February 2016
7:56 am U.K.

Webby179@hotmail.com

Hi peeps, I have recently purchased a Sony UVW-100 eng camera. When it arrived, it was missing the bottom back panel, it's right next to the shoulder pad.

Is there a site that supplies parts for these cameras?

Roderick
Saturday 20th February 2016
9:30 pm U.K.

nospam@chatpage.co.uk

In response to the post below:

The old style hours meters will need to be completely replaced when the battery runs out.

But you have to ask yourself why you would bother unless you are fitting new heads?

The main purpose is to monitor headlife in a professional environment so that machines can be serviced before breaking down.

I have more BVW-75P 's than I care to count an none of them have working hours meters, they are still working absolutely fine.

Hope that helps,

Roderick

Original post:

I have a sony BVW 75P and its working fine but the hours meter isn't displaying (due to age of back up battery I think)

Can anyone tell me if its possible to replace the battery supplying the hours meter and if so where it is located.

I have the sony service manual but its very skimpy on this and simply says replace meter/battery so

do you have to replace the whole meter unit or is there a battery on one of the boards?

Any help would be very appreciated

regards

Kevin

Karl webb
Sunday 7th February 2016
5:43 pm U.K.

Webby179@hotmail.com

Hi Roderick,

Sadly I live in the United Kingdom.

I'm finding stuff on eBay, but not a lot :(

nicholas
Sunday 7th February 2016
1:47 am U.K.

nicholas719@outlook.com

require bottom board for dnw-a75p,and all the boards for a dnw a100p,also a dsr-dr1000ap

disk recorder,DV CAM MODEL.

nicholas
Sunday 7th February 2016
1:35 am U.K.

nicholas719@outlook.com

require a cleaning tape for dvw 500p

Roderick
Thursday 21st January 2016
9:51 pm U.K.

nospam@chatpage.co.uk

Karl,

Generally speaking you'll find all what you are looking on Ebay.

It doesn't show where you live, I have a charger and batteries I could sell but am based in Sydney, postage probably prohibitive.

Karl webb
Wednesday 20th January 2016
1:12 pm U.K.

Webby179@hotmail.com

Hi,

Just purchased two Betacam SP format cameras

1 Sony DXC 537 with a PVV1 backend

2 Sony UVW 100

Can you advise me of where to find Batteries, rain covers and viewfinders.

Thanks :)

Martin
Sunday 10th January 2016
4:39 pm U.K.

martin@palsite.com

The Betacam chatpage is back, unfortunately recent posts have been lost.

mark
Sunday 17th October 2010
10:02 am U.K.

silversalmom@tiscali.co.uk

Link below corrupted, please see this one

http://www.electronic-visuals.com/WAVEFORM VECTOR/EV-4151spec.pdf

mark
Sunday 17th October 2010
9:56 am U.K.

silversalmom@tiscali.co.uk

Waveform vector monitor £295

Location: Greater London - Chingford E4

Description: Electronic Visuals EV-4151 Waveform / Vector Monitor in good condition, sharp beams and no burns on screen. Mains lead included.

The EV 4151 is a 6 input waveform monitor which is intended for use in TV and video systems where analogue component signals are present.

The inputs are arranged in two groups of 3 component signals though either may be used for composite signals as required.

Component signals may be RGB, Y (B-Y) (R-Y), etc... and the unit is compatible with both 625/50 and 525/60 systems.

Relative amplitude, timing and signal linearity can be easily established using readily available test signals, eg. colour bars, bowtie, staircase.

For full spec see here;

http://www.electronic-visuals.com/WAVEFORM%20VECTOR/EV-4151spec.pdf

robertas
Sunday 17th October 2010
8:08 am U.K.

robertas9@gmail.com

Price is 1400 euro

robertas
Sunday 17th October 2010
8:06 am U.K.

robertas9@gmail.com

Hello,I am selling top class betacam camcorder. Its Sony Bvw– d600p camcorder with a lot of extras. I am third owner of this kit. And as previous owners mainained it very clean and safe I took good care of it as well. This camera was used to shoot in green screen studio. Technical specifications of this camera you can get here:

https://www.yousendit.com/download/UFVvZUNrdkdFc0x2Wmc9PQ

http://www.yousendit.com/download/UFVvZUNqQzczeUpFQlE9PQ

The previous owner made general maintenance and changed everything. And now camera‘s counter shows such hours:

A – 314 hrB – 157 hrC – 382 hr

If you have any doubts about camcorder, you must send me a question and I will try to answer it as soon as possible.

As I mentioned above camera comes with a lot of extras. It has two pag chargers. Pag micromaster and Pag Quasar, former is fully automatic charger with power output for camera, cable also is included. Cable is made by me ant not original, but as I worked in studio, I always used this power option to get rid off batteries. Batteries is also included two Paglok Superpacks which are old and not really usable( holds ten minutes or less) and one Paglok L95 battery which is used but holds very good. It also provides information about itself on digital screen. You will know how much it is charged, and then working it also show how long it will last. Next item is Portabrace shoulder case model sc-d600 you can find it on Portabrace webpage. With camera also comes books: Camera operation manual, and two volumes of service manual, so you will be completely equiped with all technical information you will ever need. I provide 4 new Maxel 30minutes length tapes and 26pin ccz cable to output component video. I used it to capture video in real time and didnt use recorder. Cable also is not original and made by me, so no warranty, but it is working perfectly. Everything will be packed in original flight case to ensure maximum safety of the camera. Flight case one side is a little rusty, but still looks and locks good.

Next Item is Chrozsiel mattebox and filter kit. Mattebox holds two filters, one rotating, one fixed. It is one from famous Chrozsiel matteboxes with adjustable trap. There is one French flap. Camera base is included and everything is packed in nice case. There are filters included:

Tiffen:Black pro – mist ½Black pro – mist 2Black pro – mist ¼Black pro – mist 1Coral ¼81 EF.

Lee filters:81D81BResin PolarSky blue 1 Grad softSky blue 2 Grad softSunset 1Sunset 2.3ND grad soft.6ND grad softCoral 1 grad soft

Everything is used but in top condition.Here is a list that you get:Camcorder( Fujinon lens, microphone with wind cover, battery adaptor for Pag batteries( original battery mount not included), memory card.Porta brace shoulder coverPag micromaster chargerPag Quasar chargerOne power cable for chargerTwo Pag superpack batteriesOne Pag L95 batteryOperational manualService manual volume 1Service manual volume 2Chroziel mattebox with camera mount16 Filters4 new maxel b-30m tapesCCz 26 pin to component video cablePower cable to feed power from quasar charger to camcorderFlight case for camcorderCase for mattebox

The package is heavy one

+37060239970

Rick
Tuesday 12th October 2010
4:33 pm U.K.

Ricky_Rockenstein@yahoo.de

Seekinj for a BVW-35p as for parts. Please, only offers from the South-Germany area!

Chris Margrave-Gregory
Tuesday 5th October 2010
2:49 pm U.K.

chris@thameside.tv

Hi,

I have a number of machines that I am interested in selling if anyone is interested.

Sony UVW 1600P @ £300.00 GBP

Sony BVW 75P £2,000.00 GBP

Sony PVW 2800P @£ 1,750.00 GBP,

Please let me know if you are interested in any of the above machines.

Call Chris on 01932 240305 or you can email me at chris@thameside.tv

Look forward to hearing from you.

John
Tuesday 28th September 2010
2:03 pm U.K.

majoreiswater@ntlworld.com

I don't see a digital PAL page, so I'll try here.

Sony DSR 11. DVCam Recorder/Player deck.

I bought this new from Prestons in 2005. Its never been loaned or hired out.

Operation hours: 9. Drum hours: 4. THAT'S RIGHT, 4!Tape: 3.Thread: 18.

The original Sony PSU is here, remote, manual, fire wire,it's all here here, except the little tray Sony give you to stand it on its end in, why, I don't know,plus a box of 10 new tapes. It uses large or small tapes etc.I can deliver to your nearest main line railway station, oryou can collect from WF15 area. A snip at £400.00 This is a test, cash and collect deal, or I can deliver. NO P+P!! Email for more details or call 07722949935 or 01274864826Regards, John.

Jan Arne Austad
Wednesday 25th August 2010
2:27 pm U.K.

jan-arne@austad.no

I have problems with a SONY PVW-2650P. Getting errors 01, 02 and 03 for intermittable...and for now only error 05. Some tips?

Does somebody have the service/repair manual in pdf or something for this player?

Thanx in advance!

John
Wednesday 11th August 2010
3:10 pm U.K.

majoreiswater@ntlworld.com

SONY DNW A100P Betacam SX.

I am looking for a replacement cassette compartment for this machine.If anyone has one for sale please advise. Regards, John.

Jessica
Thursday 5th August 2010
7:00 pm U.K.

jrye@kpts.org

Hello All. I am having a problem with my Betacam Sp uvw-1600, alot like the 1800. I am getting the error code 08-032, which says The abnormal drum speed error is not solved. Is there anything I can do to fix this? Anything I can try? I'm desperately neding to reslove this or at least try everything possible. I know this is a far out cry, I'm thinking the heads are done, but I want to be sure. Thanks in advance for your time and consideration.

Arvind
Tuesday 27th July 2010
11:22 am U.K.

arvind@movicotech.com

We provide low cost high quality video tape digitization and metdata addition services. Just send us your tapes and we will send back digital video files as per your needs that you can publish on web or mobile platforms. We will bundle our eLibrary manager, MediaBaron for anyone with 100+ hours of inventory. Check us out at www.movicotech.com .

Mark
Friday 9th July 2010
9:39 am U.K.

silversalmon@tiscali.co.uk

About twenty Betacam tapes (as new) going down skip this weekend unless somebody wants them. London area E4

John
Tuesday 29th June 2010
11:50 am U.K.

majoreiswater@ntlworld.com

For Sale.

I don't see a DVCam chat page, so I hope this is ok.

Sony DSR 11 DVCam Recorder/Player deck. New Condition.Mileage as follows: Operation 9 X 10 hrs. Drum run 4 X 10 hrs. Tape run 3 X 10 hrs. Threading 18 X 10 hrs.User manual, Service manual, cables, original PSU.Some blemishes, but no dents, digs, or gouges. Fronthinges and panel still intact. I can't find the tray thingSony give you to stand it on/in. Lots of extra goodies included.

This is strictly a cash deal. Buyer tests, collects and pays. Huddersfield area. A bargain @ £500.00. Email me for more info.Regards, John.

Pranav Pandya
Friday 25th June 2010
4:33 pm U.K.

pranav@digibroadcast.com

Used Sony DVW A500P, 1380 drum hours: £6500.00

Please call or email for more info

Robert Griffin
Friday 18th June 2010
1:37 am U.K.

robjamesgriffin@gmail.com

Hey, I'm having trouble with my Betacam UVW-100p. While getting shots on a bus my camera guy turned quickly and stupidly broke off the battery pack at the back, all the clips and threads were broken. He set me up a make shift system using leads. It worked for a short while but has since stopped. I'm afraid he may have reversed polarities. Is anyone aware if this model has a shut off for such an occurrence or are the entire circuits in the camera fried.

previous new post   refresh  next