Search chat archive
Top posters in May 2003Browse by date
Please note, the chat page system used by PALsite stores a cookie in your browser holding your registered name and e-mail address for posting.
No further use is made of this information by the system.
Chat Page News
Friday 28th April 2017
Please bookmark http://chat.palsite.com/chat_page.py as the new URL.
I need a service manual for the Sony Umatic VP-1000 3/4" Player deck, (US version). I know this unit functioned, but the cassette receiverwon't go down all the way on the left side thus it won't contact therelease widget and play. Got to go in and fix, but need roadmap.
Any old school techs or engineers out there that still have the service manual?
Let me know.
Needed: Service Manual for a Sony Umatic VP-1000 (US model) 3/4" Player (deck).I know the damn thing worked, but I can't get the cassette receiver to goall the way down on the left side evenly with the right side.
Okay, let's see what kind of old school engineers are left out there. PLease reply ONLY to the e-mail shown which is emiltec @ caliescali.com (no spam please)
I'm wondering about video tapes for umatic machines.I have a JVC high band umatic machine. It is very, very beautiful. We just stared at it for a few seconds when we first switched it on as we were aghast at the spectacular glowing machine.
Anyway, I also have a large collection of old umatic tapes. The trouble is that some of them appear to be low band, and some of them appear to be SP based tapes.
I understand that low band tapes are bad for the heads of high band machines. What about SP tapes? Is it bad to use these in high band machines too? Ironically I'm not sure if I actually have any high band tapes!
I suspect my umie may have been mistreated in it's former life.
We will probably have to carry the tank all over my house to film in various locations but other than that we are determined to try and take good care of it, so if anyone can tell me more about tapes, I would be grateful.
Hi i just bought a National NV 9210, U vision and I would like if anyone could tell me about a site or send me any information on the machine im am new to this and from what i can tell it takes a Beta style tape.The machine has power and has ejected but im unable to close it! any information would be great thank you.
HI,I have a Sony VO9850P, but I can't make it asssemble or insert edit. All the usual stuff is correct, red tabs in, sync connected, video in connected, dub in connected audio in connected etc, but I can't get it to work. It laces up OK, plays back, jogs, shuttles, fast forward, rewind ,records when I press record and play together, all these work fine, but it won't insert or assemble. There seems to be some kind of modification/addition in the shape of 3 white buttons marked MENU, DATA and SET in red letters, under the CTL/TC and MEMORY switches. If someone can sell me a manual, or has any suggestions how to remedy this problem, I would appreciate their help. Mnay thanks.
Sony U-matic Videocassette Recorder Model VO-1810.Hi,I have a Sony U-matic Videocassette Recorder Model VO-1810 for sale, its serial number is 18X65. It is clean and complete but I do not have idea if it works. Please contact me for further details or any questions. I have picture of the actual recorder to be send on request.
Hello all;Can anyone recommend a good place to have a Sony EVV9000 (Hi8 back) repaired in the states??It looks like it needs cap replacement (don't they all at some time? hehe)...
Free to anyone who can collect. Philips N1500 VCR (first domestic VCR - museum?) and N1700 VCR with some cassettes. I don't think either work. 2 Hanimex 8mm cine projectors (one super8 - again both need attention). Bell and Howell video presenter (old and needs servicing). Various other old stuff which should be skipped but just in case someone somewhere can use it. First caller must agree to take the lot (what you do with it afterwards is up to you but it must be removed from my premises in Peterborough).Email me at [email protected] (remove the astrisk* - I have had to do this to stop spam; my penis is large enough already, thanks).
Hi! Does anyone have or know of a site where I can obtain a service manual for the VO-7630 or any other 7000 series RECORDER.
I have a Sony VO-7600 and when I put a tape in the stand by light comes on and never goes out. Has anybody had this problem before, any advice?
Hi. I've won a Sony VO-2630 Umatic on EBAY a few months ago and it was in perfect working condition but when it arrived to my doorstep it was damaged all no thanks to TNT couriers! Anyhow what's damaged is the cassette cradle as it's dipped in (one of the couriers must have walked on it) and the cradle won't stay down when I put a cassette in. Also the VCR won't function due to the fact that the main sensor light detecting cassette is blown. Anyhow I was wondering if there's any Australians here who might have a spare cassette cradle and sensor light for a VO-2630 as I would love to buy them from you so I can get my Umatic going again. If anyone can help, please email me at [email protected] . I'm located NSW, Australia.
I have 20 unused 3-m videotapes. Is anyone interested? Make an offer.
I have own a panasonic camcorder and have just upgraded my pc. Does anyone out there have a copy of the DVStudio software needed to download the photos?
Re the kit I was giving/throwing away. It was all collected yesterday, and is now winging its way to a school in Zaire, Africa. I worthy cause, I think. There may be more to follow. Watch this space.
can someone please tell me what a u matic tape is? Where do I buy it from in NYC? And how do I copy something from a dv tape to a umatic tape? Thanks
i have recently found a sony hvc 2200 in mint condtition. but i have no idea how it works or if its missing cables. this unit is is about is old as me. would some one please provide me with a product discription. becuase i cant wait to start playing with this camera.
I am looking for a SERVICE manuel for a evo 9800 sony hi 8 recorder... does anybody have one?
P.S. It's not like I could have them anyway, as I'm in the U.S. But still. U-mies shouldn't go into the skip.
nooooo!!! Why does everyone throw out their old u-mies!? Ask around and give them to an aspiring young videographer who's worthy of making video the old way and not with some JVC DVcam and a copy of iMovie. Someone like me, LOL. :) Give them to your thrift store or something instead of tossing them away!
I'm retiring so I have to get rid of all this good kit.
1. Sony BVE 800 Automatic edit contoller with service manual and cables2. Sony BVT 500 Digital Time base Corrector. (This one can convert Low band to High band)3. Alta Pixis 2 channel TBC with effects4. Sony VO8800 SP portable recorder in mint condition, and Kangeroo bag.
I know this kit is more or less worthless, so to anyone who can use it, it's FREE!You can either collect it, I'm in West Yorkshire, or for the cost of the diesel, I'll deliver it on the UK mainland. This is a one off deal, I need the space urgently, so if I dont hear from YOU by Saturday August 9th 2003, IT'S ALL IN THE SKIP!!!
oh no. Im the only technician working for the entire month of august. One of our old 3/4 Umatic decksSony -5850 recorder deck has a tape jam. Error 22. I have watched my boss move a lever or breaker near the play head but I am usure how to eject this tape... Please any suggestions, I need to get this tape out and the other technician is away on holidays.
equipments for sale urgent very cheap price and good cond.low hrsOur Equipments
1 Sony DXC 3000 PK camera1 Sony BVU-150portable rec/TC1 Sony BC210 batt charger1 DPL4x2 AC/adp.4way charger1Sachtlervideo14tripod/dolly1 sony dxf 40C wievfinder BW1 Wide angle attac.7.51 Sony LO-23 zoom lens contr1 sony BVT 810 TBC1 sony DME 450 digital effec1 Sony VO-9850p Sp VTR inc TC1 sony VO-9800p sp VTR iNC tc1 SONY BVE 600 editör1 Echolab DV-5 mixer1 VIP SPG/Bars1 sony PVM 1320 monitor1 sony ECM 55 mic1 sony BVU 50 port.recorder1 PESA Character Generator1 sony MXP 21 Audio mixer 8ch2 sony PVM 1442 QM monitors1 EV Waveform monitor1 Textronic vectorscope1 sony PVM 1442 QM monitor1 Video patch panel1 Audio patch panel
I have 60+ unused AMPEX KCS20 umatic tapes. They were left over from a charity project a few years ago but are still in perfect condition in their wrappers. Anyone interested?
Just like to let people know that i offer transfers from most video formats such as UMATIC, J format reel to reel Beta, etc I do this as a hobby so do not look to profit from the work, only cover costs of the equipment and repairs etc
I am located in australia so can only deal with PAL format material
I offer the cheapest rates around, I will beat any written quote!
Feel free to contact me for any questions [email protected]
To James [about the Hi8 deck]
Problems I've found with Hi8 [and standard video 8] camcorders and decks is that either the small 'mode' motors fail, or the driver chip that operates them fails, or if you're lucky, just the ICP [IC Protector - looks a bit like a small silicon transistor but only has 2 pins] fails. It seems to be when crap [either shredded tape or grit] gets stuck in the teeth of the gearwheels that lace/ unlace the mech and put it into different modes [don't forget: Hi8/ V8 is like betamax and fully loads the tape as soon as you insert a cassette - so if it can't do this, you're not even goin gto be able to rewind/ fast fwd]
anyway, it seem slike the extra current drawn when the gears get stuck is sometimes enough to kill the motor driver chip or the ICP. On the EVS1000 and '90s range cameras, this stuff is on a small PCB under the mech. On earlier models [EVA series] it's all on a standard full size PCB [much easier!]. If the motor itself has gone [try using a 6V batt pack after you have disconnected the motor from any VCR circuits and see if you can get the transport to change modes - to prove this] - well, it's goign to have to be a call to sony I would have thought and you'll have to weigh up what it's worth as to get the part.
can any one give me the price of a sony bvu 800 i cant seem to find it anywhere
Is there enyone who can help me with the pin connections of the 7 pin dub conn. I wonder if there is a possebility to convert it to an Y/C pal signal for best dubbing quality to an computer or SVHS. The pin connections of the 14 pin ccu cables would be nice to. I have 2 portable rec. vo8800, one of them with zero ours ! and a vo9600 all of them SP performing great with an Ikegami HC300 and Sony DXC M3A camera's.
Kind Regards to all UMATIC users,
I have a tape stuck in my BVU-800. Does anyone know how to manually unthread it?
Thanks in advance.
Re.:AUDIO RECORD PROBLEMS VO-5... /audio is not recorded or not erased/The defect may be caused due internal failure of bias/erase oscilator module too. As well as poor contact in relay it may also occur only intermittently . This module is silver metal box on AU board, marked CP501 (CP-502), SONY part number 1-464-139-00. Resoldering of pins of this module can sometimes help. Push slightly pins toward the module when resolder.Details for checking: pin1 +12V (only in REC or AUDIO INS mode), pin2 and 4 GND, pin3 in active state switched to GND by transistor, pin 5 output 71kHz (guess 200Vpp), pin6 not connected (tapping of secondary winding).
Have some u-matic for sale. VO5800PS, VO5850P, VP5030P, VO6800PS and RM440 control unitSony camera DXC3000P,Fujinon lens 1:1.7/10-120,case,charger X4 batteries.All in good working order, plus cables books. IN N.I.
FOR SALE : Sony Umatic vo5800ps (offers)in good condition, powers up, but unable to further determine functionality, as i have no suitable tapes. as is. includes power cord. from Brisbane, Australia.
(I actually stumbled across this one, and have had it sitting around for a while. thought it was VHS before i got it home! - was surplus)email me if you are interested! Thanks!
Does anyone have any experience with HI8 machines? I have an EVO-9500A (NTSC) that powers up ok, accepts a tape but does nothing else. It will not thread up, play, spool or anything. All the voltage rails are present and correct. Anyone have any clues? I dont have a service manual unfortunately.
The AU boards on the '5' series vo umatics that have problems recording audio, this is usually due to the relays not engaging. The vo-5850 has 2 of them (as you can insert individual tracks of audio) and the vo-5630 has one. They are in a metal can that needs to be desoldered. Farnell do the relays part number 635-522. Other audio problems are the front panel rec pots going open or intermitent and capacitors on the AU board.
anyone have a verified working spare AU-28 audio board (for/from NTSC VO-5600) they'd be willing to part with for shipping? Or, anyone willing to diagnose/repair mine? :( My poor NTSC VO-5600 looks like it needs a new one. The CN-10 connector has come unsoldered and I don't know how to do repair tasks such as that. I stick to tape path cleaning, etc. :(
I have a VO5630 I think it is and it too has exactly the same problem. It plays video and sound spot on, but will only record crackles of audio and only if the VU's are clipping at the top. The recorded picture is fine.
If you get anywhere, could you let me know [remove all the underscores from the address above]. I don't check these pages very often.
Thanks in advance, Steve.
Hi people out there,
can anybody tell me whether or not it is possible to operate a Panasonic WV-F250 at the left eye, i. e. can one turn the viewfinder mount unit such that the view finder ocular is located at the right side of the camera housing?
Hello all..... I have a VERY annoying problem with my NTSC Sony VO-5600. It will read tapes (audio and video) acceptably, but will only record video (no audio). If you let the metres go into the red, or let them get pegged, it will record bits of overload audio. Nothing else. All connections and settings are correct for recording with line cables.
Could anybody tell me if the G.M.L. TBC-2002S is a full frame time base corrector?Unfortunatly I don' have a service manual.
HihI i'M LOOKING FOR THE HANDLEBAR TO CONNECT THE PANASONIC AG7450(S-VHS (i'M SO SORRY) TO THE WVF250 CAMERA) Its known as a comlete dock kit called wv-dkt70mthe complete kit would be nice too ofcourse
1x Sony 7040 player. Works fine. 20quid
1x sony 5040 player. Plays fine, but problem with eject 15quid
Please call : 07816 197612. I am not interested in posting these machines - I don't have the time. If you want them, you'll have to come to Manchester and collect them. If not, they are going in the skip soon.
Thanks, SteveIf you want to e-mail, please remove the 'anti_spam' prefix
1x SONY 7040 Umatic player - works fine. 20quid
Looking for male 33-pin connectors for Sony V0-5600 decks.
Does anybody know how to configure a BVE-910 for editing with a VO9600 Umatic Sp player/recorder?
Who can help me to find the servicemanual for the Ikegami HC-300 ? Thanks !
hIi'M LOOKING FOR THE HANDLEBAR TO CONNECT THE PANASONIC AG7450(S-VHS (i'M SO SORRY) TO THE WVF20 CAMERA)
U-MATIC DIGITAL AUDIO EQUIPMENT FOR SALE ,fOR LESS !!!SONY 3x PCM 1630 DIGITAL Audio Processor1x PCM 100 DIGITAL Audio Processor3x DMR 2000 NTSC DIGITAL MASTER RECORDER U-Matic1x DAE 3000 Editon Control UnitRTW Meter Display s for PCM1630/1610Sony K 1105 Digital 8 channel Mix Desk
Dont hesitate to ask for Photo s if you interest !!!
I recently added a National AG-6200 to my kit but it has a strange problem. Still picture is perfect (as perfect to be expected), slow motion and fast motion are fine but when at normal play speed the picture disappears behind tape noise. Tracking doesn't help. Ideas anybody?
I recently bought a National AG-6200 as an addition to my edit kit. The problem is that it has a perfect still picture (as perfect as that technology could get on VHS), fine slow motion, fine fast motion but when you drop it to normal speed it is a shocker! Can't see the picture for the streaks, looks like it is totally of track, but tracking doesn't help. Ideas anybody??
I found an old Panasonic NV-9600 u-matic machine whichstill works but the loading-mechanism (toploader) seems to bebroken. Has someone a service-manual? thanks
Anybody know where I could get some information (servicing manual) for a National Panasonic M7 video camera. Thanks.
Anyone have a VP-7020 manual in PDF format (or other format) that you could share with me?Thanks
I have a VP-7020Is there any way of getting a better signal out of it than a plain old composite video?Is there a U-Matic Dub board I can get for it?Any way of getting component out?Thanks
Can't Matt or someone just delete it, and then re-publish the page to the website without it?
Is it possible to filter out messages like the illegal software offers that stuffed up this chat page earlier this week?
Hi, I'm selling my complete U-Matic High Band Edit Suite for just a few Euro's. If you're interested, please mail me. The following items are for sale. Everything works.
1 x Sony VO-9850 U-Matic SP Editing VTR (incl. BKU705 Time Code Generator/Reader)2 x Sony VO-9800 U-Matic SP (incl. Time Code Reader)1 x Sony VO-8800 U-Matic SP portable (incl. Time Code Generator/Reader) 1 x Sony VO-5630 U-Matic (loband) (PAL/SECAM/NTSC) 1 x JVC CR-4400 U-Matic portable rec.(loband) Sony BVE-600 3 machine Editing control unitGML-Merlin dual channel Time Base CorrectorAmpex ADO 2000 (realtime 3D effects)JVC KM-2000 Special Effects Generator Hitachi VE-102 PE Vertical EnhancerSigma Black Burst generatorVideotek VDA 16 video-amplifierPhilips LDK-14 (3-tubes plumbicon) colour camera RCU + Power supply LDK-14caption tripod incl. light2 x Sony PVM-1371 QM colour monitor 14"Philips CDI incl. digital video cartr.Akai GX-630 D PRO Audio Tape deckAcorn Archimedes 310 character generator19" rack, bnc cables, etc. etc.350 VHS tapes (15 min.)(new)+/- 100 U-Matic tapes (SP + lo band) (used & new)Intercom, cables, manuals etc.
Can someone tell me how to display the hours used on a VO-9600P and a VO-9800P please.
I loved your site. Congratulations <a href="http://www.e-flight.biz/">Cheap flights tickets airline airfares</a>
The BVU-200P has gone!
FREE to a good home - a Sony BVU-200P high-band U-matic with wired remote control panel, manual and 10 tapes. Stored in shed for many years, but powers up and appears to be in working order, for playback at least. Would need to be collected from Dartford in Kent (UK) within about 2 weeks, or else it's being scrapped. If interested, mail me privately, removing "_sickofspam" from my email address.
BOX AND MANUALS ARE ALSO AVAILABLE AND OF COURSE REMOTE CONTROL.
does anybody know the weight of the sony v0-4800 portable u-matic player ?
For sale: a complete set of VO-5630 service manuals, brand new with all supplements and corrections.
Make me an offer, just remove all numbers from the email address.
Hi--i would just like to invite people to have a look at my web site http://www.angelsinthesky.com -and hopefully you will enjoy my music .You can chat with me on yahoo messenger--my id is kurtdahl43
OLD UMATIC TAPES FOR SALE ALL LENGTHS AVAILABLEPRICES START @ 4 FOR £10.DISCOUNT FOR BULK ORDERS
GOAL!Here: http://homepage1.nifty.com/Sony/Data/Parts_Making.htmlAll models vcrs Betamax (from 1975 to now) can to repair each type of gears and mechanical (PAL and NTSC)!
Before, is very problem and now yours all vcrs U-matic (also U-Vision and U-VCR) are function that to come back new after repair!Also whatever others format: VCR, VCR-LP, SV, V-Cord, VX, Betamax, VHS, Video 2000 and others reel tape (all measures)!Need also toys if is broken for repair!
SONY-U-MATIC, VO-2611 FOR SALE,seldom used, make offer,Chicago area.
Hi! I have a HITACHI FP-15 3 tubes camera, for sale, in excellent conditions and working fine. It have hard case with wheels, tripod mount, service and instruction manual, power supply, and microphone. I´m from Argentina. If any is interested please contact me.Thanks
I have the following for disposal:1 VO8800p Hi band sp portable u matic, as new, 50 hrs on the meter, 1 VO6800ps lo band portable recorder, good condition.e mail me for details, [email protected]
I want to sell a 'Digital' Switcher branded Sony ,6 line IN/OUT /one SCART connector;suitable for Professional/Broadcast.Price about 2 grand, I'll ebay in few days later.
Anyone interested will be given further informaions.It's Brand New and very rare.
I can be reach at the Betamax Chat page.
am running pulse 2000 ver 9.1 rev C. I just bought a new laptop and am running XP. Is my software compatible with XP?
I am new to the umatic world and want to get into it more,,, i have a bunch of umatic pal video cassetes with some footage i want to edit, but it plays black and white with an uncler picture on my vo 5630, , i dont know how to tell if the casssetes are low band , high band or Sp as it is not written on them,,,can anyone help me out wit htis and maybe where do i buy umatic more players
FOR SALE OR EXCHANGE:-WINGS 2.5, 3.0 -EOS2.0 New upgrade 2002 October (eos2.0, Album 9.1, Realist 9.1, Video Tutorial, auto learn) -Pulse Signature 2000 V9.1 Rev A, G, M-Wilcom Sirius ES65 V6.0M V6.1D -ApsEthos V3.21-Tajima DGML 6.0M; 6.0T-Barudan Punchant 6.0J -Sierra Embroidery Office V3.12, 6.11 (EMULATOR)-PE-Design 4.0 -Melco EDS III, IV SUMMIT VER 2. AND VER 3 XTREMME + ALL FONTS-Brother BE-100 v2.1 -Punto V4.73, V5. -Origins software v1.65 -Richpease 2000-Windaisy v5.3 -Embird 7.11, 7.20 + 12 alphabets+thread-Embird ver 8 all suite-Stitch Shop Pro v2.0 R7-PFAFF PC-Designer v2.0-Wilcom Truesize v7.1-Oklahoma Sizing Magician v2.0 Generation 2000NEW STITCH PROGRAM-Cross Stitch-XStitch Pro 2000-WIN Stitch V6.4
Embroidery Design Collection-Great N 1999,2001,2002 and 2003 NEW -Dakota 1997,1998,1999,2000,2001-Compucon Anthology-1: 6000 DESIGN-Compucom Anthology-2: 4700 DESIGN-Pantograms Stock design 2000-EOSD DESIGN 18.000 in dst
Designs for view & Print-Dakotabook 2002 22,000 designs for print only-Oklahoma ESD Book 2002 18,000 designs
-PET Training 4 cds for Wilcom es-21-45-55-60-61 and NEW V7.1 Digitizen Essentials Lettering Editing PET Version 6.0-Windaisy V4.5.2 LEARN VIDEO LESSONS -Training Pulse Signature 2000 on CD
CAD SYSTEMSOptitex VER 8.0Padsystems VER 4.1Gerber Systems VER 3.0Lectra 3.1 and 4.1Primavision v 5.1 from Lectra
MANUALS WILCOM ES-65 V60, V6.1D and NEW V7.1 DGML LEVEL 5 BARUDAN PUNCHANT PRO V6.0 WINDAISY V4.5.2 USER MANUAL
DEMOS ORIGINS EOS COMPUCON BARUDAN PUNCHANT WINDAISY 4.5.2
WITHOUTH CKIPUNCH VER 8TAJIMA, BARUDAN, DGML VER 7PULSE SIGNTARURE REV T, TAJIMA BY PULSE Xwilcom7.0 and v 7.1fSHOP DESIGN.........AND MORE
To adjust the Chroma EE level, find PCB CO-12. Adjust level with T301, testpoint is TP307. Let me know if you need further information (remove all numbers from my email address).
Friday 30th May 2003
6:16 pm U.K. ¶
john_carpenter-cw@ discovery .com
I'm trying to find some information about setting the EE line level on a VO-7630 which has RCA ins and outs. We don't have a manual for it, and my manual for a9600P which has a similar audio card, says to adjust line at a different card which the 7630 doesn't appear to have. Any help with PCB and pot #s would be appreciated.
Hi,Can anyone tell what the Sony DXC-1820 is....a tube or CCD camera. I was told it is a 3 CCD camera. But then again, I bought it for $30.00 at a swap meet.Thanks....
Check out this link, SONY BVT-800PS TBC FOR SALE WITH MULTICORE CABLE & MANUAL.
SONY VO-9600P FOR SALEI have two of these available in good condition with 250 drum hours on one and 300 drum hours on the other. These machines will playback and record low band, high band and SP. They also have shuttle control knob, vu meters, rf output, 2 video outputs and ext sync input. £575 each, London, UK.
Wanted an Instruction Manual for a Sony BVU-110 portable recorder,
I'm looking for a 4 pin AC 110 adaptor for a NTSC U-Matic VO-6800.
Hi, I just purchased a sony vp=7020. I was wondering if anyone has a service manual for it or if you know of anywhere on the web where there is a pdf version that can be downloaded. Thanks for your time.
Here, the videorecorder Sony SLO-323 and Betamovie BMC-100 and Panasonic U-matic and Teac recorder tape Compact Cassette: http://www.phantomprod.com/vinBetaArea.jpg
Site complete nice photo gallery: http://www.phantomprod.com/PPIStudio.html
HELP... Looking for spares and belt kit for a JVC BR-6400TR can anyone help?
For your application I wouldn't buy a portable machine. They only take the small tapes so what happens if someone sends you a standard size tape? I would also make sure it is a multi standard machine. USA records in NTSC where the UK records in PAL. I would look for a VO-5630 or VO-7630. Both are reliable workhorses and pop up on Ebay often. Or look for local Broadcast traders, a bit more expensive but you get a well maintained machine.
hi there - I am pretty inexperienced at anything detailed to do with U-mat players - but am looking to buy one as I compose alot of music for ads. I have seen a VO-4800 fro sale - which I am aware is portable - but have no idea if it is Loband? If it takes normal sized loband tapes? (i received some reels from the states once and they were small lo-band u-mat tapes)... I am assuming you can both record and playback on them? The one I have seen advertied does not have a power source (12V battery pack? Or can I run it from the mains as well with the correct trabsformer? Are these expensive?) can anybody help me with this endless list of questions? Thanks! dan
i have a sony dxc-m3a how do i enable the internal sync. i have tried to use the video out but it wont lock in. i was told the sync generator is also internal. please help!!(i'm new to the high quality stuff
First we must know what we are connecting it to, and what protocol they're using.
actually there are lots of module in markets; maybe made in taiwan would be cheap....
Is it possible to control RS232 machines with an RS422 edit controller? Does such an interface exist, If so, does anyone have a schematic. I would be very interested in trying this.
(2) Panasonic NV-9600 U-Matic Top Loading Tape Decks(2) Panasonic NV-9240 U-Matic Top Loading Tape Decks(2) Panasonic AU-A70 U-Matic Edit Controllers(whole box) of cabling for these machines(100) or so U-Matic tapes for these machines
Located in Toronto, ON Canada
If you are interested in these units or know someone who would be, please email:
or phone Steve at,(+01) 416-533-4250
Hi,How do i find out the hours run on a BVU 950P ?
Thanks in advance...
I have a JVC CR-6060e U-matic VCR and was wondering if anyone knew where I may be able to obtain some spare parts for this. The rubber wheel which drives the take up spool has turned to goo. I have another 6060e and the same thing has hapened to it. There are some other rubber components that look like they do not have long to go either. Any help would be much appreciated. - Thanks, John.
let me know if you interest for:
Sony Digital Audio U-Matic system
3x U-Matic Recorder DMR-2000Editor DAE -3000 3x Audio processor PCM-1630
Digital Mixer Unit Sony 1105
Video Recorder Sony BVU 870p
Tuesday 6th May 2003
11:46 am U.K. ¶
let me know if you interest for:
Sony Digital Audio U-Matic system
3x U-Matic Recorder DMR-2000Editor DAE -3000 3x Audio processor PCM-1630
Digital Mixer Unit Sony 1105
Monday 5th May 2003
1:54 pm U.K. ¶
I have a Sony BVE 800 3 machine automatic edit controller, fitted with 36 way parallel interface boards. I am looking for a set of 9 way serial boards, or a single board for the P2 port, or to swap the whole BVE 800 machine, including 2 BVU 200s in perfect working order, for a 2 machine serial controller such as a Sony 450. I can collect and deliver UK mainland
Sunday 4th May 2003
2:47 am U.K. ¶
How would I hook up 2 u-matics so that one (master) controls the other (slave). For playback only, TC sync
Saturday 3rd May 2003
5:28 pm U.K. ¶
I have a box of 10 Sony KSP S20s, brand new, unused, still in the original wrapping. Are they worth £30.00 to anyone? I can deliver them on uk mainland
Thursday 1st May 2003
11:50 am U.K. ¶
We sell our equipment composed of TWO player/recorder, by THOMSON-CSF model n° TTV-3915P.We also have to offer a SONY Editing Control Unit n° RM 450 CE, an Audio Mixer from TASCAM n° M 30.We also offer a SONY trinitron colour monitor n° KX-20PS1 with its speaker system n° SS-X1A.Please, contact us by e-mail if you're interested, we're located in France.Nice price for the whole package.