Featured models

Browse by date
β J F M A M J J A S O N D
1999                        
2000                        
2001                        
2002                        
2003                        
2004                        
2005                        
2006                        
2007                        
2008                        
2009                        
2010                        
2011                        
2012                        
2013                        
2014                        
2015                        
2016                        
2017      

Chat Page News
Monday 1st May 2017

Please bookmark http://chat.palsite.com/chat_page.py as the new URL.

previous new post   refresh  next
Ray or martin
Tuesday 3rd October 2006
2:22 pm U.K.

[email protected]

FREE FREE Umat machines (South London):

JVC CR8500LE EDIT SUITE COMPRISING 2X 8500 LOW BAND UMATS AND RM86E edit controllerand multiway edit cable connectors. worked ok when last used a few years ago. This must go complete please do not ask for just the cables!

SONY VP5030 LOWBAND UMAT PLAYER (PAL SECAM NTSC) Ex college looks complete but not run up

SONY VP2030 UMAT PLAYER (PAL NTSC) worked ok when last used a few years ago.

They are free to a good home otherwise they are going to the dump.THESE MACHINES ARE HEAVY PLEASE BE PREPARED TO CART THEM OFF YOURSELF.

MUST GO BY 16 OCTOBER 2006

Roderick
Tuesday 3rd October 2006
7:44 am U.K.

[email protected]

Denis, have a look here: http://www.bnoack.com/index.html?http&&&www.bnoack.com/data/cables/pinouts.htmlI am pretty sure the pinout is the same for 4-pin DIN plugs

ella brown
Sunday 1st October 2006
9:39 am U.K.

[email protected]

For Sale,VO7630 Recorder gwo nice condition,reasonable offers considered,Ella.

Denis Doyle
Thursday 28th September 2006
3:21 pm U.K.

[email protected]

Hi

Can anyone help with a wiring query.

My Sony 4800P has died. Now I want to use the AC 340CE adaptor with a Sony 6800PS (it came with no AC adaptor. )The 4 pin connectors on each machine are are opposites (male / female) so I need to wire on a different connector to the cable.

The cable from the adaptor has 4 wires - yellow/white (+V?) - white (-V?) - white with braiding (?) - orange/white with metal braiding (?)

Can anyone tell how I need to wire these up to the new connector.

TIA

Denis Doyle

Roderick
Wednesday 20th September 2006
10:35 pm U.K.

[email protected]

Julian

Since you are set-up to do conversions from VHS already, I'd say your best bet is to hire a U-matic machine. This will give you much more control over how the tapes are transferred.I suggest you hire a VO-9800 or 9850 because they will playback all three flavours of U-matic (low band, high band and SP) unless you know exactly what you have.

Julien
Wednesday 20th September 2006
9:14 am U.K.

[email protected]

Hi everybody,

I recently found U-matic videotapes in my company's archive and I think it would be good to convert them into dvds.We already have a computer with everything needed to encode vhs tapes, but we do not have the adequate device to read U-matics.Given that it would only take 5dvds (approx 500min), what do you think would be the better way to do this conversion ?Shall I rent a device or send my tape to someone (MVS Video for example) ?In work in the UK.

Many thanks for your answer,

Regards,

Julien.

Craig Felsmann
Friday 15th September 2006
12:44 am U.K.

[email protected]

Toppy 707070, Youre obviously someone with good taste! l have some good news; and some bad news. The good news is that l have a complete 6 tape set of the best Dr.Who of all time, starring in arguably one of the best Dr.Who series of all time- Jon Pertwee in The Green Death, on U-matic....The bad news is, that l would never part with it- not even for an incredibly generous offer! lts the only Dr.Who l have on U-matic, and ld be interested to know if you have any old Who series; or indeed, any other interesting old, preferably British shows, on U-matic or Beta for sale. lm in Brisbane, Australia, Regards, Craig.

Toppy707070
Sunday 10th September 2006
1:26 am U.K.

joseph_west(NOSPAM)@bigfoot.com

I am looking for old Umatic recordings of the british Sci Fi series "Doctor Who" especially oColor ones from the 1970's starring Jon Pertwee

ajhaynes
Monday 4th September 2006
10:14 pm U.K.

[email protected]

I'm looking for a copy of the service manual for a sony BKU-903 plugin time base corrector, this can be in PDF form. please email if you can help.

Mike Dimeo
Tuesday 29th August 2006
7:08 pm U.K.

[email protected]

Slightly off topic. FREE TO A GOOD HOME. Chyron VP2+M Composite CG (NTSC). Used as character generator in U-Matic edit system. Yeah, it goes back to 1990, but it was a good machine then. Downstream or Mid-Stream w/ Key Out. Includes Six (6) PROMs + Service Manuals. All I ask is shipping to your location or you can pick it up. Westhester, NY area. (USA)

Robert
Tuesday 29th August 2006
12:24 pm U.K.

[email protected]

Help me please. We have a SONY VP-7020. It worked fine after being parked for a spell. I inserted a tape to start a new project (small Umatic type) and now it does not want to do anything but standby. The tape will not eject or play. Can anyone direct me to a website or help with my dilemma? Robert @ 1 800 252 5604 X238

Roderick
Sunday 27th August 2006
10:15 pm U.K.

[email protected]

Robert32

I would suggest a 9800 or 9850 would probably be best for you. They will play low-band, high-band and SP tapes, a 5850 only plays low-band. If you are looking at system conversions too, have a look for a 7630, they play NTSC/PAL/SECAM but low-band only.

ROY DAVIES
Sunday 27th August 2006
2:06 pm U.K.

[email protected]

If you are looking at getting in to u-matic.Good starter is the 5850,I have 2,one works great the other mainly for parts.Good place is ebay.co.uk or if you are in the us.com,9850 is ok,Mine cost £103,sells for £150 to £350.If you can afford it,go for a BVU950, I have 3,2 work,one for parts,they come up every so often and sometimes broke,2 of them are,but one of them works,You tend to not get them if they work as people do not sells these,one that was broke,lucky i took the TBC out and put it in one that works.The TBC costs secondhand £500 to £750.i bought a machine for just the courier fee of £60,You have to know Where to look and you have the internet.Keep searching the waves.

robert32
Saturday 26th August 2006
11:00 am U.K.

[email protected]

Hi,

What do people recommend in the way of a ggod quality U-Matic deck to look out for?

I'm currently buying in decks and computer equipment to start off a freelancing digital restoration service. What would be ideal to go after for my purposes?

Cheers,

Rob.

Charles
Saturday 26th August 2006
5:16 am U.K.

[email protected]

looking for VO 9850P,hi-band U-matic SP edit recorder or VO 9800P hi-band player for transfer of archive material to DV. Immmediate need. tel: +234 803 322 2787

S.C.Ahuja
Tuesday 1st August 2006
12:45 pm U.K.

[email protected]

Kindly inform any service engineer or agency, taking Annual maintenance contract for Panasonic Photocopier cum Fax cum printer model DP 1810 F, in Ludhiana (India).

Paul Boyd
Wednesday 26th July 2006
4:57 pm U.K.

[email protected]

Looking for a used fully functioning UMATIC player for purchase to transfer tapes to DVD for a project in Canada later this year. Any used machine owners send info & I'll get back to you. Cheers.

Miriam
Wednesday 26th July 2006
7:57 am U.K.

[email protected]

Hello, I have a Umatic BVU-800P, and I wanted to know if it reproduces KSP-S20 cartridges, because I have the Umatic for sale and a possible buyer asks me for that.

grant howie
Wednesday 19th July 2006
10:21 am U.K.

[email protected]

serviced umatic machines for sale eg vo5630 £75 vo 9600 £150 most models in stock also some jvc/panasonic svhs machines. workshop repairs to umatic-digi beta machines, please add VAT to prices remove numbers from email to contact gshbroadcast services ltd.

Rory
Friday 14th July 2006
7:45 pm U.K.

[email protected]

I just got a VO-9850p off ebay to dump our local TV archive from U-matic to dvd . The thing worked fine for about an hour or two . Then i really put my foot in it . I removed the tape tray mechanism to remove some paper that was logged in the machine (from packing) and now all the lights on the panel light up and it refuse to react. Looking through the forum I saw a guy called Gareth had a similar problem but he's obviously more of a techie than myself and said the problem was a tiny break near the track on ps503 . I have no idea what this is or where to locate it . Can someone enlighten me ...

Would really appreciate it thanksRory :-(

Brian Kassler
Monday 10th July 2006
5:21 am U.K.

[email protected]

Hi,

I have 2 x VP7040, 1 x VO5603, 1 x VO7630 and a RM580 for sale. All working last time I looked.

email - [email protected]

Mike Dimeo
Thursday 6th July 2006
7:06 pm U.K.

[email protected]

Used U-matic tapes for free. New York, USA post-productin facility is moving. All are 20 minute, leading brands in hard cases. Used once for shooting in the field, then transferred to editing system. Currently stored in clean conditions. We are about to dispose of them, which I think would be bad from a recycling point of view. All I ask is shipping cost to your location.

Mike Lee
Monday 3rd July 2006
3:05 pm U.K.

[email protected]

Does anyone know the battery type number for the JVC PR-4800E portable highband umatic machine ??

Reg
Wednesday 28th June 2006
9:03 am U.K.

[email protected]

I have a Johnichi torque gauge.I don't know the model number but it appears to be 0 to 300 cm-g range. It has a 3 jaw chuck. Its serial no is 4191R and its in its presentation case. Does anyone have any info about this kit; is anyone interested in purchae?

Boby
Tuesday 27th June 2006
3:24 pm U.K.

[email protected]

I'm lookin for SOMY KX21HG1 service diagram.I really need it in PDF or mail me.

Thanks for the help.

geroge
Monday 19th June 2006
7:20 pm U.K.

[email protected]

I have a umatic vp7040. I am trying to play a PAL tape in color to a Sampo multi format plasma. Have tested the plasma and the ports are fine. The projector in the room also plays the umatic fine in color to the screen. So I know the umatic works in color but it wont play on the Sampo. I am in the USA. Does anyone have any insight into this? I have no owenrs or service manuals. Thanks, George

John
Monday 19th June 2006
11:20 am U.K.

[email protected]

Sony VO-2850P control knobs needed, and help with rewind/fastforward problem:Looking for one round/aluminium topped knob, and 4 lever type knobs for this machine.

Also, any suggestions for fixing fastforward/rewind problem. Machine starts to do both, and then shuts down. No problems as far as I can tell with tape end sensor, or tape slack sensors.

If I quickly press, rewind, stop, rewind, stop, rewind stop, it will eventually lock into rewind (until end of tape).

Is really weird, and these machines are new to me. I have a service manual for it, but so far this hasn't helped much.

Thanks in advance for any help anyone can give me.

John

Roy Davies
Friday 16th June 2006
3:43 pm U.K.

[email protected]

Using this site one is getting a lot of e-mails from africa and quite a lot of lottery e-mails from other countries,but mainly spain.On here it is great to get advice on things regarding u-matic etc,but naturally i will not reply to e-mails from people who do not know me other than u-matic and other than if i have got to know them over a period of time,so one can trust them,naturally I WILL NOT REPLY TO ANYONE WHO DOES NOT KNOW ME ASKING FOR MONEY OR GET RICH QUICK SCHEMES.I HAVE HAD TO WORK LIKE ANYONE ELSE TO GET WHERE ONE IS TODAY.ANY E-MAILS SENT FROM THESE GROUPS ARE DELETED QUICKLY AND I DO NOT REPLY,I AM LETTING OTHERS KNOW...

Brian
Thursday 15th June 2006
8:06 pm U.K.

[email protected]

Anybody interested in buying a Sony low-band U-Matic VO-2630? The unit is used, but in excellent condition, and complete with the original packing box, accessories and manuals. I also have 5 fibreglass air transit cases, each containing 16 pre-recorded low-band U-Matic video-tapes, but to be considered as blank due to possible copyright problems.

Holvoet Rik
Wednesday 14th June 2006
4:41 pm U.K.

[email protected]

HI, Who can help me to find the operation manual for a Sony BVE -800 editing controller.I will you good pay for a copyor a pdf. Thanks

John
Wednesday 14th June 2006
1:16 pm U.K.

[email protected]

Hello: I need a manual for a Panasonic WV200CLE/AG7450 CAMCORDER.If anyone has a manualplease email me.

John

Craig
Wednesday 14th June 2006
5:44 am U.K.

[email protected]

Panasonic AG-A800 User ManualDoes anyone know where to find one?Or a good copy?Please email me at [email protected]

MEWI
Monday 12th June 2006
2:01 pm U.K.

[email protected]

Hallo,We have a problem with the Sony EVO-9850P Hi8 Recorderit shows the error code 20!Can anyone help us to know what is wrong andd what it means?

Thank you

John
Monday 12th June 2006
8:29 am U.K.

[email protected]

Another Sony 2850 question. When I first turn it on, with no cassette inserted, the main motor and head drum stay on permanently. Is this normal? Once a cassette is inserted, it partially laces up, and then main motor turns off. Rest of machine functions seem to work OK.

If anyone can offer any advice - much appreciated! Thanks,John

Roderick
Sunday 11th June 2006
11:13 pm U.K.

[email protected]

John

I may be able to help you with that, I have a box of brand new Sony U-matic spare parts I bought years ago to maintain my machines. If you could email me (remove all numbers from the address) pictures of the knobs you are after, I'll try and see if I can match them.

Roderick

John
Sunday 11th June 2006
3:50 am U.K.

[email protected]

Sony - VO-2850P parts wanted: Looking for 5 knobs in total, one of the round ones with the aluminium top, and 4 of the black plastic 'lever' type ones. Am in Sydney, Australia, but happy to pay for the knobs, and postage. Also looking for copy of user manual.

John

Roy Davies
Friday 9th June 2006
4:49 pm U.K.

[email protected]

You have to use the correct power supply to run a SONY DXC M3A.I Use a SONY CAMERA ADAPTOR CMA 7CE,Now this one is a bit older than the one you should use,but much cheaper.cost me £53 With delivery on ebay,here in the uk. also use the right cable for the camera,I use CCQ-5ar,costs £55 from stanley productions.I feed it into my BVU 950 Via BNC.

moosh101
Friday 9th June 2006
12:52 pm U.K.

[email protected]

Hi John. I too have a Panasonic WV-F70/AG-7450 camcorder. There is a remote control unit for the camera system (WV-RC36) though I dont think it controls recording start/stop functions. Its a shame as I too find it a little ackward when using a tripod. Apart from this, I love the camera. Cheers, moosh101.

tim
Thursday 8th June 2006
9:51 am U.K.

[email protected]

hi i recently bought a sony dxc m3p bradcast camera,ive managed to find a 12 v power supply which seems to power it up and the viewfinder lcd lights up but thats all ,i cant get a picture coming through,all the controls seem to work fine,could it be the power supply doesnt match? will i have to buy a battery for it?im sorry im very new to this and dont know much about it at all,any advice will be very appreciated ,

thankyou

tim

Roy Davies
Wednesday 7th June 2006
5:56 pm U.K.

[email protected]

Head cleaners are available for u-matic at stanley productions in london,KCS-5CL Cleaning cassette is the same as the cassettes,they use in the portable u-matics.Thanks again to the chap,who i bought a manual off on here.help is out there if you ask.

Lavona
Wednesday 7th June 2006
5:29 pm U.K.

[email protected]

Hello everyone!

I work for an e-bay consignment store and I'm not sure if you can help me, but I thought I would ask. I recently got in a Hitachi FP-21 3 tube camera with a tamron 665H zoom lens and an AP40 Power Regulator. I'd like to find out the date these were manufactured and any specs that might be considered significant. Thank you for your time!

Lavona

John
Tuesday 6th June 2006
6:36 pm U.K.

[email protected]

Hello: Can someone help me? I have a Panasonic wv f70/AG7450 Video cassette camera and was wondering if there is a remote start cable for it.When it is on the tripod ,it is difficult to reach around to start and stop it.

Thank YouJohn

Russ Margolius
Saturday 3rd June 2006
7:13 pm U.K.

[email protected]

I have available for sale 2 Sony VO-5600, a Sony VP-5030, a Sony VP-5000, and 10 used 3/4" tapes. They were pulled from working service at a broadcast studio. Will consider any reasonable offer. Located in northeast Pennsylvania. Here are some pictures:http://users.wildblue.net/marsales/SONYUMATICS.html

Roy Davies
Friday 2nd June 2006
4:00 pm U.K.

[email protected]

Head cleaners for u-matics are like rocking horse xxxx,use video cleaning fluid,got that years ago from boots,i tried looking for a cleaner months ago,but are NOT available,some guy out there with marketing skills should invent one,make a mint.

Roy Davies
Friday 2nd June 2006
3:52 pm U.K.

[email protected]

Hard to get hold of manuals for the VO5030,Do not know,which country you are in,but you would be better getting a VO5800PS or VO5850, on ebay here in the uk,you can get them for £40 to £50 pounds,last months i bought a VO9850 for £103 with postage,I have a photocopy user guide to 5800/5850,got them for 98 pounds with del and 5800 had a high band mod.got a rm450c for just 47 pounds,thats with postage and now on to the BVU stuff,got now 3 sony bvu 950, got one for 73 pounds,that was with the manuals and postage and the tbc,got one from broadcast supplies for 298,thats with postage and i got one recently on ebay,that was ex reuters for 99p with postage,60 pounds and that was high speed DHL,thanks to a posting on here,i have a manual coming regarding the sony bvu 150, thanks again.

kumaran
Friday 2nd June 2006
6:20 am U.K.

[email protected]

Hi 2 all

Derek
Thursday 1st June 2006
11:14 pm U.K.

[email protected]

Does anyone have a head cleaning tape for a Sony VP-5030.

Be grateful for any help.

Cheers.

Mic
Thursday 1st June 2006
9:35 pm U.K.

[email protected]

Hi all! I'm looking for the UMATIC PALYER VP 5030 SONY user guide, operative and tecnical manual. I need to understand if the audio out is preamplified and the video have a bnc output... If the player is a low-resolution U-matic, so only Low Resolution BVU can play with it. Does anybody have a pdf of the user manual or any suggestion?Thanks a lot for your attention.

Craig Felsman
Thursday 1st June 2006
2:50 am U.K.

[email protected]

RAY CLEAR: l was near London only a month ago, returning home to Brisbane, Australia last Monday. l would have grabbed those tapes off you when l was over there for 1 month. Dont throw them away too soon, someone will see your message sooner or later and take them for sure!

Ray Clear
Wednesday 31st May 2006
9:34 am U.K.

[email protected]

USED UMAT TAPES NOW FOR FREE! Re my earlier post of last week, I have a large quantity of used Umat tapes for disposal-300plus (I stopped counting!) These have programme material (educational and training) on them but they must be treated as blanks to avoid any copyright problems. They have been stored correctly and play ok. Mix of KCA 30/60 -some SP. Need to get rid of them,TAKE THEM AWAY FOR FREE! Unless there is any interest they go to the skip next week. Must be collected from South London and all taken.

waqas
Tuesday 30th May 2006
1:35 pm U.K.

[email protected]

Hello how are

John
Tuesday 30th May 2006
10:15 am U.K.

[email protected]

Hi - anyone have a spare audio/control track head for a JVC CR-6060? Am in Sydney, but happy to pay for the head and postage.

John

moosh101
Monday 29th May 2006
7:38 am U.K.

[email protected]

Hi Craig. Yeah I wont be using any more SP tapes until I fix the problem. The tapes get creased by the pinch roller, that is 'metal' by the way. I have found a replacement one on e-bay but its made of 'black rubber'. I'll keep you posted as to how repairs go. Thanks, moosh101

Craig Felsmann
Saturday 27th May 2006
4:22 pm U.K.

[email protected]

Moosh, hope you got that problem sorted out- dont know what could be the problem. Yeah, dont put any more of those new tapes in until you get the problem sorted; especially at $20 a pop! Good luck...

Jim
Friday 26th May 2006
12:13 pm U.K.

[email protected]

Complete lo-band U-Matic edit suite for sale. Sony 5800+5850 with good heads, RM440 edit controller, For-A digital TBC, JVC KM2000 3-channel vision mixer, Melos 6-channel sound mixer, graphics via Amiga 2000 with genlock. Complete with monitors and cables in 19" rack mount. Manuals and many used and unused Sony cassettes, too! This setup will also serve as a live mixing desk, just add cameras of similar vintage. Will not split, buyer to collect from London W1. All offers carefully considered.

Ray Clear
Tuesday 23rd May 2006
3:51 pm U.K.

[email protected]

LOWBAND UMATIC EDIT SUITE (take the 1 out of my Email address)I have a JVC flatbed edit suite to dispose of. 2x JVC CR8500LE (PAL) lowband machines complete with edit controller and leads. worked ok when last used a few years ago (heads ok) so probably just needs some love.Must go! so make a VERY silly offer or the skip has it. Must be collected from South London.(take the 1 out of my Email address)

Ray Clear
Tuesday 23rd May 2006
3:39 pm U.K.

[email protected]

USED UMAT TAPES (take the 1 out of my Email address)I have a large quantity of used Umat tapes for disposal-300plus (I stopped counting!)These have programme material (educational and training) on them but they must be treated as blanks to avoid any copyright problems.They have been stored correctly and play ok.Mix of KCA 30/60 -some SP. Need to get rid of them, so make a very silly nominal offer.Must be collected from South London and all taken. (take the 1 out of my Email address)

bill lazario
Monday 22nd May 2006
11:01 am U.K.

[email protected]

hi...noticing a brief mention of one, i thought i'd ask if anyone has any idea where we could get an old SONY AV3420CE reel to reel video recorder repaired? alternatively, a reliable way to transfer from these tapes to say dv, for edit purposes.thanks a lot...bill

AF
Monday 22nd May 2006
10:13 am U.K.

[email protected]

JVC PR4800E Hi Band/SP Portable U-Matic Rcorder For Sale inc Kangaroo PackSorry but no batteries or charger - I have owned this unit from newWas working fine when last used so I presume it still is (Will check this out)

Also Sony BVU 800 Edit Machine (No pictures only whire noise/gash - so presume it needs a head set)

Also quatity of NEW and USED U-matic tape

OFFERS WELCOME - Anyone interested?

Stony
Monday 22nd May 2006
1:01 am U.K.

[email protected]

need manual for Sony VO-9800, help

Roy Davies
Sunday 21st May 2006
11:34 am U.K.

[email protected]

Service manuals not a pdf,i know where your coming from,but i would like the actual manual,i recieved an e-mail today so we will see where it takes me.got spare parts for the bvu 150 in uk or europe,get in touch

moosh101
Sunday 21st May 2006
4:57 am U.K.

[email protected]

Hi everyone. Manuals for most Sony U-Matic machines can be found at http://www.Manuals-In-PDF.com There is a cost involved, usually about US$15.00 and they are in Acrobat Reader .PDF format. Hope this helps.

Nameer Bader
Saturday 20th May 2006
7:21 pm U.K.

[email protected]

I would like to purchase the following U-matic Machines (SECAM / High Band):

Qty 2 (or more if available) x model BVU-800S or model BVU-820SQty 1 set of spare parts for either model (if available)

Please e-mail me if you can deliver NEW equipment or refurbished in good condition.

Thank you,Nameer BaderMobile: +962 79 5594455ITECO BroadcastAmman, Jordan

silvana
Saturday 20th May 2006
5:32 pm U.K.

[email protected]

where can i meet my love

Roy Davies
Saturday 20th May 2006
1:56 pm U.K.

[email protected]

Hi,has anyone got a Service manual for the Sony bvu 150 for sale,has I would be interested in Purchasing and also spare parts for this model.

moosh101
Saturday 20th May 2006
9:31 am U.K.

[email protected]

Hi Craig. I have been able to get a hold of 9 new Sony KPS-20min tapes for NZ$20.00 each, but unfortunatly my Sony VO-9850P is creasing them. :-( I opened up the unit and observed during recording that its happening at the S-drawer guide near the pinch roller, but i'm not a technician and feel a little nervous tampering with the machines internals - just in case I make things worse. It looks like I'll have to save my pennies and get a qualified tech to have a look. Thanks.

Craig Felsmann
Friday 19th May 2006
8:34 pm U.K.

[email protected]

Mooshoi- Have you had any luck scoring any NEW U- matic tapes yet? l see youre from the Land Of The Long White Cloud (NZ). lm from Brisbane, and my stock of new sealed Ampex 60min. is almost finished. Scored a dozen from a nice old Pommy bloke last year for 5 Aussies each- he has none left, unfortunately. lf youve found any newies for a reasonable price 2nd. hand, let me know. Will let you know if l find more than l need, also.Alan and Co.: Thx 4 blasting Ninki-Poop into Cyberspace!..................................

Craig Felsmann
Friday 19th May 2006
5:23 am U.K.

[email protected]

To Martin: Thanks mate; great site, too. To Ninki: get outta here if youre not a collector, or interested in becoming one...

palsite
Thursday 18th May 2006
10:38 am U.K.

[email protected]

Hopefully the guest book is now working again.

Craig Felsmann
Tuesday 16th May 2006
7:46 pm U.K.

[email protected]

Cant sign the guest book, guys- whats goin on? My 5630 is still goin on and on and on...like my Sony SLHF 100AS and SL- C40 Stereo Betamaxes! Nice site; keep it going- and long live the U- loading videotape format!

Craig Felsmann
Tuesday 16th May 2006
7:05 pm U.K.

[email protected]

Ninki, or whatever your name is ( Ninki- poop, maybe?), get out of here...

moosh101
Tuesday 16th May 2006
1:32 pm U.K.

[email protected]

Greetings. I have a Sony VO-9850P U-Matic SP vtr that has a problem with recording. During recording, with new SP tapes, the vtr makes a 'glitching' noise. During playback of the recording the image quality is very bad with lines all over the screen. I looked at the tape and had creases on it. Playback with other tapes seems ok. Can anyone help? I appreciate any advice you can offer. Many thanks, Shane.

moosh101
Friday 12th May 2006
8:43 am U.K.

[email protected]

Hi everyone. Manuals for most Sony U-Matic machines can be found at http://www.Manuals-In-PDF.com There is a cost involved, usually about US$15.00 and they are in Acrobat Reader .PDF format. Hope this helps.

adip
Tuesday 9th May 2006
5:34 pm U.K.

[email protected]

i need owner manuall and technical documentation for tape machine akai 635d tnx

colin99
Sunday 7th May 2006
8:31 pm U.K.

[email protected]

Does anyone have a Umatic Hi-band or UmaticSP tape they could lend me? I will pay postage in the UK and return the tape if required. I've just bought a known working VO-9800P, and would like to put it through its paces and learn how to run it.

Thanks for any help. (May 2006)

[email protected]

Terence Khoh
Friday 5th May 2006
4:48 am U.K.

[email protected]

Hi, I am interested to find out if there is any Complete Drum Assy (New) available for Sony BVU-800P? The other alternative is anyone wanting to sell either a BVU-800p or 850P?Pls conatct me by email, thanks.

moosh101
Saturday 29th April 2006
6:39 pm U.K.

[email protected]

Greetings from Christchurch, New Zealand. I would like to purchase new or used U-Matic Hi-band or SP tapes. Any manafacturer ok! If you have any such items for sale please contact me at: [email protected] Many thanks, Shane Oakley

moosh101
Wednesday 26th April 2006
8:18 pm U.K.

[email protected]

U-Matic SP tape stock wanted. New or used, any manafacturer! Please e-mail me if you have any such tapes for sale. Many Thanks.

Kevin White
Tuesday 25th April 2006
2:43 pm U.K.

[email protected]

Hi,

I apologise in advance if this topic has been done to death!!

I have a number of Umatic Low/High & HighSP masters I want to remaster onto DVD.

I have a Sony VO-9800P which can play all formats of Umatic.

I really want to take a DUB out & convert it to Firewire, is this possible??

I can take a composite feed into a DV deck & dub onto DV tape while digitizing BUT I would like to keep the quality of the video signal as high as possible.

I understand the issues regarding the C part of the Y/C signal from the Dub out.

What I'm looking for is a 'box of tricks' which can convert the Umatic Dub (in all its forms!!) to Firewire or at least SVHS Y/C.

So . . . . Anybody know of a solution?

Thanks in advance for any help.

Kevin

moosh101
Saturday 22nd April 2006
4:36 pm U.K.

[email protected]

Greetings from New Zealand. I am fairly new to videography and am a little uncertain as to the analogue format I should use for recording. I am considering using either S-VHS or U-Matic SP. From the specs i've seen, S-VHS has more horizontal lines while U-Matic SP has higher S/N ratio. If anyone could help point me in the right direction I would be extremely grateful. Many thanks, moosh101.

MrSlave
Friday 21st April 2006
5:47 pm U.K.

[email protected]

what types casette's i can used for BVU-820P? please!

brett
Friday 21st April 2006
10:15 am U.K.

[email protected]

Series 2 edit suite comprising of 2 VO-2850P edit recorders and RM400EC automatic edit controller with remote cables. Just add video leads and you're away. Good condition with a great picture. £75 the lot, located in the midlands, collection [email protected]

Paul
Thursday 20th April 2006
8:40 pm U.K.

[email protected]

Hi. Does anybody have a scheme for stereo amplifier HITACHI model HA-6? If do please let me know or send it to my e-mail address please.Thanks

Ben
Monday 17th April 2006
9:08 pm U.K.

[email protected]

I have a Sony U-matic VO-9850 for sale. Works great. Anyone intersetd? Email me.

Stephen Kabar
Saturday 15th April 2006
10:24 am U.K.

[email protected]

From:Mr Stephen Kabar.Abidjan Cote d'Ivoire [email protected]

Dear One, I am Mr Stephen Kabar., the only son of late Mr, Alfred Kabar a suspected rebel suponsor in bouake west cost of cote d i'voire by the government.I discoverd that my father deposited the sum of the sum of (10;500 000) Ten million five hundred thausand Million USA dollar in a security firm here in Abidjan ,and now i am in hiding in one of the city in Abidjan called Yopougoun .Due to infertility nature of my country politicaly,

I wish to invest this money In your country. I also plead you help me on the investment part of the business, You have a free hand of operation.I will like you to send to me your telephone so that i will discuss with you in person so that i will send the name of the security firm to open contact with them for withdrawl of the consignment to move it to your country for investment.. The money is in the position of a security company as a family tresure. A legal process will take place to ensure mutual transfer. .All effort made to the successful of this transaction will highly be appreciated. I hope to get a favourable reply in due curse.We can negotiate on the terms of assistance.

Best regards,

Mr Stephen Kabar.

mo
Friday 14th April 2006
10:43 am U.K.

[email protected]

hi - does any one know how to connect a sony vp 5030 to a tv or normal video? will the rf out put socket work? thanks for anyones kind imput!

Alwx
Thursday 13th April 2006
8:49 pm U.K.

[email protected]

I have a Panasonic NV-9450 recorder and no one seem to know what type of battery it takes. I got it new on e-bay but have no manual with it. If anyone knows please e-mail me.

Crossroads
Thursday 13th April 2006
11:44 am U.K.

[email protected]

Don't know If this is the right site but I'm trying to sell the following items:

1 x Umatics Videocasette RecorderV0-5800 PS

1 x UmaticsVideocassette Rocorder VO-5630 PAL/SECAM/NTSC

They are in West London and in good condition.

If you would like any further information please drop me an email.

Thankyou.

Trevor57
Tuesday 11th April 2006
2:58 pm U.K.

[email protected]

I have recently been clearing out some unused equipment at work and have a BVU-950P SP Umatic VCR. Its history is that we used to sell and support Aries and this was part of our test and demonstrator kit. I don't have any tapes so haven't fully tested it but it was in working order a few years ago and has been carfully stored since. I don't have any use for it and its too big to keep, so I am willing to let it go to the best offer received in the next couple of weeks. Also I have a Acron PAL Genlock Encoder 606P and a Lyonlamb Minivas Video Animation System. Both condition unknown. Location - West Mids. Anyone intrested?

sabrina
Monday 10th April 2006
5:46 pm U.K.

[email protected]

is this the one?

Ashish
Thursday 30th March 2006
2:30 pm U.K.

[email protected]

I have a NV-GS25 Panasonic DV camera. I am not able to download my video tapes into my pc which runs windows xp media centre edition. when i click on the DV Input device button, a message appears "No DV device is connected to the personal computer" although my video camera is connected to my pc by means of a usb cable. The pc is however reading the still photographs saved onthe memory stick through the usb cable. I am unable to install the USB driver available on the PAnasonic CD. Windows gives a message saying "USB devices use standard drivers, you need not install the driver". Can anyone help me solve this problem?

steve
Sunday 26th March 2006
11:14 am U.K.

[email protected]

For sale numerous Umatic vcr's full list at http://www.mvsvideo.comAlso we service & repair all types of pro kit just email or phone for a quote.Looking for Sony VO-9600P VCR's x3, email with asking price.ThanksSteve

Shannon
Tuesday 21st March 2006
9:27 pm U.K.

[email protected]

Hi who arew u by the way?

Olive E Thomas
Friday 17th March 2006
8:22 am U.K.

┐live_e_th┐[email protected]┐┐.com

Basically all these spammers are doing is admitting that their product is so dodgy that they had to resort to the cheapest most fraudulant form of advertising.

David Halloran
Thursday 16th March 2006
7:52 pm U.K.

[email protected]

Please I need the program Floor Plan 3D designer suit any vers.>4, I didn't find here in my city it's very difficult. Thanks - Halloran

manja kloss
Thursday 16th March 2006
10:37 am U.K.

info@thecastingsuite.com

Hi

I'm keen to find a really good maintainance company to look after our machines here at The Casting Suite in London. Any suggestions? Manja

Wijet
Thursday 16th March 2006
5:30 am U.K.

Siamtec_wj@hotmail.com

I'm find out for used V0-9800P.Contact me immediately.

Thanks.

Alexander
Wednesday 15th March 2006
2:09 pm U.K.

succes2001@hotmail.com

Hi, looking for a scheme of the 7-pins dub connector.I like to know what pin is Y,C and ground.Thanks in advance.

andrew cowan
Thursday 9th March 2006
2:09 pm U.K.

repairs@andrewcowanconsultants.co.uk

Hi Everyone

I service and maintain all standards of equipment through Beta, Digi Beta, U-matic, DVCAM, DVPRO Mini DV and most other standards too. If you have kit that needs servicing, please get in touch. (Tel 01902 750404)

Regards Andrew Cowan

TONY
Wednesday 1st March 2006
10:11 pm U.K.

tonymixme@yahoo.com

dear friend,can we meet you.

tony

previous new post   refresh  next