Featured models

Browse by date
β J F M A M J J A S O N D
1999                        
2000                        
2001                        
2002                        
2003                        
2004                        
2005                        
2006                        
2007                        
2008                        
2009                        
2010                        
2011                        
2012                        
2013                        
2014                        
2015                        
2016                        
2017      

Chat Page News
Monday 27th March 2017

Please bookmark http://chat.palsite.com/chat_page.py as the new URL.

previous new post   refresh  next
Joe Mac
Thursday 14th February 2008
9:24 pm U.K.

joe.mcalonan@tbsgb.com

Does anyone have a user or operators manual in photo-copy or PDF format. If not, can you help me understand why the unit I have (VO-7630)is constantly in 'standby' mode - light on. However, I can't see a switch for this or a 'remote' function.

Help appreciated.

Charles Mapleston
Wednesday 13th February 2008
5:50 pm U.K.

charles@malachite.co.uk

Hello U-matic experts! I have many old U-matic tapes of TV programmes I made which I want to transfer to digital video, hopefully using the DUB output on my U-matic deck (VP-9000P); I know this is similar to S-video but not the same. I have a Sony DUB to S-video cable, but that is only giving me a B&W output. Does anybody know how I can alter the chroma signal to give me a colour output so I can avoid using composite video for my transfers? I believe there may be some 'magic box' available, or perhaps I could build one if it is fairly simple? I'm sure if someone was able to provide such a converter box there could be many customers for it! Thank you in anticipation. Charles

Roderick
Monday 11th February 2008
8:40 am U.K.

no.spam@thank.you.com

Rich,Older Ampex tapes (80's & early 90's) are rather prone to 'sticky tape syndrome' the most likely cause of your problem. It is caused by the emulsion on the tapes absorbing too much humidity which softens the emulsion and it starts scraping off during play. The tapes can be fixed by extracting the humidity from the tapes. There are commercial places that will do that for you or, if you have a fair bit of time on your hands, you can attempt it yourself. Google 'baking a tape' for useful hints - but do not put a tape in the oven as the search title may suggest!!

Rich
Saturday 9th February 2008
9:21 am U.K.

richardolsen@bigblue.net.au

I have a few Ampex tapes that will only play half way through before coming to a literal screeching halt on my VP5030. The unit has only just been serviced and is otherwise in perfect working order. Has anyone got any idea what could be causing this and if there is a fix for it what would the fix be?

Clinton
Saturday 9th February 2008
3:55 am U.K.

cjradloff76@yahoo.com.au

has any one got any PAL vo-6800ps, vo-8800ps in Australia please email cjradloff76@yahoo.com.au

no ebay, private sellers only.thanks

Colin99
Monday 4th February 2008
10:04 pm U.K.

colin99@bigfoot.com

To Dave, re VO9600.

See my posting of 6th Sept. I found with this fuse blown and no 5V supply, that the LED timecode readout was not working on a VO9000 (similar but different model). I would suspect that the 5V line might be missing on your VO9600. You should see the LED display operate without a tape inserted.

Colin (www.video99.co.uk)

Gus
Monday 4th February 2008
1:43 pm U.K.

u.matic.pal@gmail.com

Dave: Don't forget to leave the machine in power on at least by one day, this assures that it is not going to have humidity problems due to the much time without working. This it is a cheap and safe method, agree?Hope this info help you.Best regards,Gus.-

Dave
Sunday 3rd February 2008
8:58 pm U.K.

davedunbar@homecall.co.uk

I just read my above message and realised it doeasn't mention the model. Doh.

It's a Sony VO-9600P and it is for sale on Ebay at the moment, but I will have to revise if the LED is knacked.

Cheers

Dave

Dave
Sunday 3rd February 2008
8:39 pm U.K.

davedunbar@homecall.co.uk

Hi there

I need some advice. My question is this:

When the machine is switched on, there is no red LED counter displayed. It's been years since I used one of these machines and I can't remember if the counter comes on once a tape is inserted. As you may have guessed, I don't have a tape to try it out. Is the timecode display knackered or am I right about the need to insert a tape first before it lights up?

Thanks in Advance

Dave

Gus
Saturday 2nd February 2008
7:21 pm U.K.

u.matic.pal@gmail.com

To bebop1065 and anyone else that want to try to back to life any of this beauties, those that has been left per indetermine time on the attic or basement: don't be scared (have no fer)in leaving the machine in power on and in stop position during one or two days before operating them; the normal heat (warm) produced by th machine itself, will evaporate the humidity that affects the efficiency of solenoids and most important, the parasitic capacitances of the electronic boards, wich shifts the adjustments made at factory, and will soften the lubricants of the mechanism too.It worked on my machine, that was stored since 1998!

Gus
Saturday 2nd February 2008
6:47 pm U.K.

u.matic.pal@gmail.com

I've purchased recently a SONY VO-2631 machine. Works perfect, thanks God, but i want futher information about this format, like gaps sizes, head positions, pin assignment of inputs and outputs, where to download the Owner's and service manuals of the VO-2631.

Thanking in advance,Gus Argibay.-

glyn
Thursday 31st January 2008
9:33 pm U.K.

glyn.smart@btinternet.com

hi, anyone know the pin to pin connections to connect a RM-440 to a VO5850P and VO5800PS CHEERS

Hershe
Tuesday 22nd January 2008
7:02 pm U.K.

peacecampherstory@yahoo.com

After migrating 50 tapes with no problem, the picture on our borrowed BVU800 went blank. We replaced the video cable and had video for the first 3 minutes of our next tape before it went blank. Any ideas/advice would be most appreciative. We have 85 more tapes in the collection to digitize.

bebop1065
Thursday 17th January 2008
7:30 pm U.K.

bebop1065@hotmail.com

Correction.

The machine is NOT an A4772008 but rather a VP2000.

Thanks,bebop

bebop1065
Thursday 17th January 2008
7:20 pm U.K.

bebop1065@hotmail.com

Hi guys,

I found an old A4772008 in the basement at work. It rewinds, fast forwards, ejects and pauses. It just won't play anything. It seems that the drive motor isn't engaging the take-up reel.

It won't play the full-size or the smaller size tapes. I have no idea why it was put on the storage shelf or when it was last used.

Any ideas?

Thanks,bebop

Roderick
Thursday 10th January 2008
8:30 pm U.K.

rode98476rick21@stage0923safety0293.com

Nyquest, How are you watching the tapes? Are you using the 'Monitor' output or the 'Video' output? Is it going straight into a monitor or through a digital device?

Blockiness is normally associated with digital pictures and the VO-9800 is a analog machine.... If you are feeding the signal into a digital capturing device, my guess would be that that is where the problem sits. Try to connect the machine directly to a video monitor and see what happens. And if you could post a picture of the 'effect' somewhere, that could help people solving the problem.

Cheers

Nyquest
Tuesday 8th January 2008
1:30 pm U.K.

nyquest@btconnect.com

Hi I have a VO 9800P.I am getting blocky video output on high contrast areas at random points in my tapes (6 different tapes)However if a crossfade happens at one of these points the "blockyness" dissaperas as though it only occurs at certain frequencys??I am no expert on this, will a head cleaner sort this. Machine bought from MVS video supposed to have had a service we have only used it 3 times since now this apperas but only had 3 months warranty (bought 6 months ago)Thanks in advance.

Dave.

Maciek Szymanski
Monday 17th December 2007
3:45 pm U.K.

ms@NO-SPAM.sdf-eu.org

Andrea:

What do you mean by "U-matic camera" - a camera that can work with a U-matic recorder or a U-matic camcorder? You can use any camera with composite output with U-matic. If it's broadcast camera with 14 or 26-pin socket you can hook it up to the portable U-matic and you have an ENG setup (you can control your camcorder from your camera, review recordings in viewfinder etc.). As for camcorders I've never hared about U-matic camcorder or camera dockable recorder. I suppose they has been introduced with Betacam. In the golden age of U-matic, and even in early Betacam usage the ENG setup was camera + portapack recorder + optional batery belt to power everyting :-).

Joe
Monday 10th December 2007
12:55 am U.K.

joe.kelly@silvertrak.com.au

Wanted - Sony VO-9600P or VO-9850P decks in serviceable condition. Will pay good price for these decks if anybody has any. Thanks

francois
Monday 3rd December 2007
9:16 pm U.K.

iguane78@free.fr

Good evening Colin99 . I 've worked with BVU high band in SECAM in french TV station FR3 (now france3) . I remember the machines were the same as PAL but you have to change one (or more) of the 3 long circuitboard to convert the machine in SECAM . Regards Francois

previous new post   refresh  next