Featured models

Browse by date
β J F M A M J J A S O N D
1999                        
2000                        
2001                        
2002                        
2003                        
2004                        
2005                        
2006                        
2007                        
2008                        
2009                        
2010                        
2011                        
2012                        
2013                        
2014                        
2015                        
2016                        
2017  

Chat Page News
Saturday 25th March 2017

Please bookmark http://chat.palsite.com/chat_page.py as the new URL.

previous new post   refresh  next
Diego
Saturday 22nd January 2011
1:33 pm U.K.

diego.moimas@yahoo.it

Hi to all!I found a Grunding 2x4 Super at the University junkyard so I took it with me.Some parts were missing so I've decided to disassemble it. If somebody of you needs the mechanics (without spindle motors) or the boards (expect front panel board) or the front panel (there is one "door" missing), I'll send you at the only cost of shipping.I live in north-eastern Italy (near Trieste).Sorry for my poor English.Regards,Diego

Keith
Monday 17th January 2011
4:35 pm U.K.

keith_mchugh@hotmail.co.uk

Hi, does anyone know where I can source new pinch rollers for the Philips VR2840 ? At one time I remember an Amstrad VHS part was a compatible match for the earlier models of these 2nd generation machine but can't remember which one.

Thanks, Keith.

Steve
Thursday 16th December 2010
6:52 am U.K.

stevengeo47@ukonline.co.uk

I now have for sale on ebay six Grundig 2X4 Super VCRs, 2 working (but not perfect) others for repair/spares (inc 1 stereo model), remote controls, instruction book & service manuals, 34 used cassettes (inc head cleaner). All in one job lot.

trevor
Sunday 12th December 2010
1:22 pm U.K.

mufdivtwo@yahoo.com

hido you have any old vhs or v2000 tapes that you no longer use or watch?if yes and you live in the wembley or brent area, please contact me because i collect old tapes...no time waters please.thanks.ps no pre-recorded tapes..cheers

Steve
Tuesday 30th November 2010
9:22 am U.K.

stevengeo47@ukonline.co.uk

Message for anyone looking for help etc.There is a user site in Yahoo groups which may be useful if no success on PALsite.Steve.

Steve
Tuesday 30th November 2010
9:01 am U.K.

stevengeo47@ukonline.co.uk

Message to anyone looking for help etc.There is a V2000 user site in Yahoo groups which may be useful if no success on PALsite.Steve.

Steve
Thursday 18th November 2010
2:47 pm U.K.

stevengeo47@ukonline.co.uk

I have for sale on ebay a V2000 (ex-rental) tape library with over 340 assorted titles, including thriller, horror, war, westerns, comedy, childrens, adult etc.

Also, six Grundig 2080 (2X8) VCRs for spares or repair.

Soren
Tuesday 16th November 2010
10:57 am U.K.

soerenkell@yahoo.dk

Hi.

I'm interested in byuing a video2000 player so I can transfer my old tapes to a computer. Is anynody in here in posession of such a player or know somebody who is?

Thanks upfront.

SorenCopenhagen, DK

garyclark
Monday 15th November 2010
9:06 pm U.K.

ggc75@hotmail.com

Hi,

Looking for a good working order machine and maybe some tapes.

Get in touch if you can help, cairns1975@hotmail.co.uk

Thanks Gary

Matt
Thursday 4th November 2010
2:54 pm U.K.

matthew_churchett@hotmail.com

Does anyone know how to change the display from seconds to minutes on a VR2324?

Cheers, Matt

Carl Brentnall
Monday 1st November 2010
8:14 pm U.K.

shiver@sky.com

I have a Grundig v2000 1600 2X4 Machine. Up until Recently It's been working fine. Now it starts to play then stops (i don't think the tape is getting took up). I have taken apart and found that the motor underneath is loose and wobbling from side to side Is this normal? I just presume it should have a little give in it. It's the motor thats connected to the arm at the top which switches from reel to reel.

Matt
Saturday 30th October 2010
9:03 am U.K.

matthew_churchett@hotmail.com

Am looking for some blank tapes too. (Not necessarily blank, but ones that can be recorded on)

Get in touch :)

Matt

Matt
Friday 29th October 2010
2:13 pm U.K.

matthew_churchett@hotmail.com

Hi there

Am looking for a V2324 manual in particular if anyone has one.

Cheers, Matt

Matt
Monday 25th October 2010
5:59 pm U.K.

matthew_churchett@hotmail.com

Hi there

Does anyone have any user manuals or service manuals for v2000 machines?

A photocopy or a PDF file would be fine.

Cheers,

Matt

Gary Shepherd
Sunday 26th September 2010
3:00 pm U.K.

gshepherd2@sky.com

Hi. Owing to my father now moving into a nursing home i have acquired 6 V2000 recorders which are a mixture of Phillips and Grundig. They are a mixture of 2x4 and 2x8 machines. I honestly do not know if they are in working condition but knowing my father there is a good chance that they do although i have a feeling recording heads may be an issue. Outwardly they all look in excellent condition. I would like to sell these and am open to offers. I will provide any information you require and photographs if you would like them.I am sure they would at the very least be of use to someone who needs spare parts. I look forward to hearing from anyone interested

Roderick
Saturday 11th September 2010
9:46 pm U.K.

nospam@palsite.com

For N1500 tapes in the UK, try Colin McCormick - www.video99.co.uk

Keith
Saturday 11th September 2010
12:22 pm U.K.

keith_mchugh@hotmail.co.uk

Anyone know of a working N150x machine where I can get a tape transferred ?Thanks, Keith

GaryClark
Thursday 9th September 2010
6:24 pm U.K.

ggc75@hotmail.com

Hi,Am looking for good working a V2000 to buy, i live near Heathrow. also looking for any associated items for these machines you may have. Please get in touch. Thanks Gary

Mike
Sunday 5th September 2010
2:35 pm U.K.

mike55298@googlemail.com

Found a Philips N1700 Video head on ebay if anyone is interested :Item number: 120617417626

George L.
Thursday 2nd September 2010
4:49 pm U.K.

geolazr@yahoo.com

I have a Grundig 2000 2X4 and need to replace its broken up power pack (item code 27502-059-01)If someone knows how and where to find this part, please e-mail me.Thank you.George

previous new post   refresh  next