Featured models

Browse by date
β J F M A M J J A S O N D
1999                        
2000                        
2001                        
2002                        
2003                        
2004                        
2005                        
2006                        
2007                        
2008                        
2009                        
2010                        
2011                        
2012                        
2013                        
2014                        
2015                        
2016                        
2017  

Chat Page News
Thursday 27th April 2017

Please bookmark http://chat.palsite.com/chat_page.py as the new URL.

previous new post   refresh  next
Richard Reynolds
Sunday 7th January 2001
6:36 pm U.K.

[email protected]

Hi Keith: Just to add to my last message I remember having a VHS vcr (a Sharp) in for repair with the same symptom and it turned out not to be a faulty sensor, but the reel table in so far as the reflective surface has deteriorated. The VCR had apparently not been used for months and had not been stored in ideal conditions, I think damp had got to it. Could this be what's causing your problem? Richard.

Richard Reynolds
Sunday 7th January 2001
6:27 pm U.K.

[email protected]

Hi Keith:I'm not too sure about the Grundig V2000 machines but all the later Philips machines used a magnet on the teel table that triggered a hall effect ic. Logically the sensor would be mounted on the take up reel but many vcr's have a sensor on both to account for reverse motion, ie: picture search. If you have access to an oscilloscope you can scope the relavant testpoint in the vcr and see if an adequate waveform is produced. Sorry I can't be of any further help on this one, though the actual fault is probably very easy to cure. Richard.

Keith McHugh
Sunday 7th January 2001
2:24 pm U.K.

[email protected]

Richard: I suspected the reel sensor but I'm a little confused on how it's supposed to work ! There only appears to be a single sensor and that's on the take-up spool (connected by a three wire ribbon cable). The sensor looks like a small black cylinder just at the front end of the reel. It looks like it should be a optical sensor but there's no reflective material or any gaps on the reel for this to work. If it's an electro-magnetic type - would the small magnet be inside the reel itself, again there's nothing apparently on the reel itself. Thanks, Keith.

Iain Dyche
Sunday 7th January 2001
12:13 pm U.K.

[email protected]

Two things I would like a little help with if there is anyone out there that can assist. First, I have a Grundig 2x4 Super that loads the tape around the head but then immediately stops ans winds it back into the cassette and leaves the LED above the TAPE switch flashing. Also, I have noticed that the head capstan drives from the moment the tape is inserted until the unit times out. I assume that this may be a sensor problem, any ideas on where I should start looking.

Second, when trying to play tapes from a Philips 2022 in the Grundig, the picture keeps breaking up and there is sound only very occasionally. The Philips and the Grundig both have Dynamic Tracking with the signals being recorded on the tape. Is perhaps the Philips incompatible with the Grundig or should this work. ??

Any help appreciated.

Richard Reynolds
Saturday 6th January 2001
9:48 am U.K.

[email protected]

Keith:I'm not sure absolutely about your model, but check the reel motion sensors they may be contaminated or faulty. If the machine can't detect any reel motion it is assuming there is no tape drive and triggers the stop command. The reason you can see a still picture is because no reel motion occurs in pause or still mode to there is no fault to detect. They are located underneath the reel tables.Richard.

Keith McHugh
Friday 5th January 2001
9:43 am U.K.

[email protected]

Does anyone know what might be wrong with my Grundig 2x4 1600. It runs for only about 2 secs (FF,REW,PLAY,REC) and then shuts downs with the pause light flashing. However if I press pause just after playback starts it will stay on still frame but and soon as I start it up playing again it shuts down. Also the counter doesn't move much only by one digit when I first start the machine up Any ideas ? Thanks, Keith.

Martin Kirk
Thursday 4th January 2001
4:18 pm U.K.

[email protected]

I'm looking for a working Grundig 2x8 VCR so I can use my large stock of old tapes. Nayone have one available? Failing that, anyone know a source of repairs, especialy new heads?

David Squires
Monday 1st January 2001
12:19 pm U.K.

[email protected]

Whoops! Just noticed the message above my last!

David Squires
Monday 1st January 2001
12:17 pm U.K.

[email protected]

I have just acquired a Grundig 2x4 GB front loader. Does anyone have a spare manual or could let me have a photocopy of one? Please email me - thanks!!

Mad Beta Collector
Thursday 28th December 2000
8:50 pm U.K.

[email protected]

Good news to all that needs a service manual go to WWW.Mauritron.co.uk they have service Manuals for nearly all vcrs of any format including Grundig 2x4 super!!

Iain Dyche
Monday 25th December 2000
12:15 pm U.K.

[email protected]

HiCan anyone supply, or lend me a copy of the Service Manual for the Grundig 2000 2x4 video recorder. I have copying facilities and could return it reasonably quickly.

Mad Beta Collector
Wednesday 20th December 2000
6:56 pm U.K.

[email protected]

Does anyone have a Circuit Diagram for the Power supply of the Grundig 2x4???If you do or know of website or whatever please contact me(E-mail shown above)

Thanks anyway:-)

Neil
Monday 18th December 2000
3:34 pm U.K.

[email protected]

Hi - good to find a site devoted to the best VCR system.Thought somebody might find interest in the following ad, which appeared in last Friday's Coventry Evening Telegraph:"Grundig 2000 2x4 Super video recorder plus 25 tapes, G.W.O; £60 ono. Tel 024 7650 4547".Incidentally, I had my Grundig 2x4 fitted with new belts about three years ago by Videotec in Oxford, but whether company is still able to repair V2000s, I don't know. They have a website:www.videotec.co.uk/

Walter Steenvoorden
Friday 15th December 2000
10:48 pm U.K.

[email protected]

There is no Audio in the SVHS signal, but i doubt computers being any good at DVD playback. Most soundboards have a small delay, and pictures and sound do not sync easy. A DVD player for a tv costs around 300 euro, and playback perfect. Or try a 21 inch trinitron monitor on your PC (Like i did :-)...)

Scott Holmes
Thursday 14th December 2000
7:33 pm U.K.

[email protected]

Can anyone help me with a problem I have to do with S-VHS ?I am trying to run a lead to a television with only scart inputs from a computer(for DVD) with an S-VHS output. I have found an S-VHS to composite video converterin a catalogue but it looks like there is only a phono video output and no audio.Is this right? Is there no audio in an S-VHS signal? Do I therefore use the soundcard phono audio outputs and connect them to the correct pins in a scart plug theother end?

Michael van Londen
Sunday 10th December 2000
2:03 pm U.K.

[email protected]

Recently I bought a Philips VR2334, and wanted to playback the tapethat were recorded on the my parents Erres VR2234.Unfortunally the image is very bad and I thinking that is has to dowith the tracking, but I haven't been able to adjust the tracking.Is there a way to adjust the tracking? New recordings made in the Philips are looking good.

Mad Beta Collector
Wednesday 6th December 2000
6:30 pm U.K.

[email protected]

Hey Stuart who offered me a grundig 2x4 I am having difficulty contacting you pls confirm your E-mail is [email protected] and if not or whatever please please contact me thanks ever so much.

E-mail is shown above

Paul :-)

Andy
Sunday 3rd December 2000
5:02 pm U.K.

[email protected]

Has anyone out there got a Grundig 2x4 (Super) working power supply in a worn out machine ? Will pay any reasonable amount.

antonello
Sunday 3rd December 2000
2:59 pm U.K.

[email protected]

ciao a tutti, sono antonello e vengo da napoli

martin wright
Friday 1st December 2000
12:25 pm U.K.

[email protected]

anyone whith a good working v2000 video recorder for sale must be cheap + any one with any blank or prerecorded tapes like star wars trillogy i want to start a collection for 6the first time sofar ive been collecting 16mm film i will transfer my films over to tape for people realy cheap if you are interesteds then why not e mail me i allso want a good working v2ooo for archiveing my 16mm films + 8mm filmsthanks for readingmartin

Andy
Wednesday 29th November 2000
11:40 am U.K.

[email protected]

Sorry, not Steve, but Stein.

Andy
Wednesday 29th November 2000
11:39 am U.K.

[email protected]

To Steve,Yep, have done the power supply check. It's definitely Kaputt.I suppose I could possibly replace those capacitors but what else will have failed on the board ? I saw smoke coming from it before so I think the board is largely done for.

Rob Bestwick
Tuesday 28th November 2000
10:49 pm U.K.

[email protected]

For Sale.......blank V2000 tapes (all lengths). Price £1.50 each (used maybe 2-3 times only) inc orig. covers .

Stein
Tuesday 28th November 2000
9:01 am U.K.

[email protected]

To Andy.

If you haven't already done it, I suggest that you should check the power-supply for dry joints and electrolytic capasitors that have dried out.

Andy
Monday 27th November 2000
9:22 pm U.K.

[email protected]

I own a beautiful old Grundig 2x4 Super which still gives stunning pictures. Unfortunately, the power supply board has gone west. Any ideas/stroke offers for a replacement? Sorry if I haven't seen an offer already posted. Thanks.

Rob Bestwick
Sunday 26th November 2000
11:44 pm U.K.

[email protected]

For sale , Grundig V2000 2+8 in great condition plus over 90 tapes , owned by us from new. Serious offers please.

Mad Beta Collector
Sunday 26th November 2000
4:07 pm U.K.

[email protected]

Do anyone have a V2000 machine of any type for sell plus one or more tapes?If so pls contact me (E-mail shown above)I live in the North West of England so anyone who has one in England and can deliver will do greatThanks:-)

Mike Bennett
Wednesday 22nd November 2000
6:18 pm U.K.

[email protected]

Hi.

Is there any prospect of a PAL Site for the Philips VCR / VCR-LP standard? I for one would love to see this. What do other people think?

Kind regards.

Mikey.

http://www.oldtechnology.netmailto:mdb:oldtechnology.net

bernd
Sunday 19th November 2000
4:13 pm U.K.

[email protected]

IR-Remote control unit for Grundig Stereo Video 2x8 (maybe 2x4 too ...)for sale on ebay, look here:

http://cgi.ebay.de/aw-cgi/eBayISAPI.dll?ViewItem&item=503522408

Greetings,

bernd

bob A.
Wednesday 15th November 2000
10:37 pm U.K.

[email protected]

I just talked to the owner of the 30+ machines that are brand new/old stock in the original box with manuals and instruction tapes....He is in the process of moving and would like to sell them each for $100.00 US plus whatever the shipping cost will be...again...these are brand new ....never out of the box machines purchased directly from grundig.....It looks like I have 35 of the 2x4 v2000  machines....there are several cartons of tapes to go along with them....If you are interested please contact me at:Bob [email protected]

Please contact asap one way or another because I am going to actively try to sell these and the first contact who says yes will get them...thanks for any interest....

bob A.
Sunday 12th November 2000
5:57 pm U.K.

[email protected]

Hi, I just came across 30 - Video 2x4 mono 2000 Grundig Recorders that have never been out of the box...also 1 2 x 4 stero 2200 recorder...I don't have a clue as to what these sell for and this person wants me to make him an offer by Nov.19th,2000. He has to move and these must go....If anyone reads this by this date please email with a $$ amount that I could offer and still make some money...thanks...

mürsel
Friday 10th November 2000
3:55 pm U.K.

[email protected]

klooooooooo

Steve
Sunday 5th November 2000
10:17 pm U.K.

[email protected]

Does anyone have a Philips VR2840 to sell/swap (dead or alive)? Thanks, Steve.

andrew mann
Wednesday 1st November 2000
5:37 pm U.K.

[email protected]

Looking for a quantity of v2000's. Can anyone help.

Steve Skinner
Saturday 28th October 2000
11:53 am U.K.

[email protected]

I have a Bang & Olufsen Beocord 8802-V V2000 machine, in workingorder, with quite good picture quality, depending on the quality of the original recording ( but with a "whine" on the audio track - more noticeable on quiet passages and not noticeable on music etc - which is probably caused by a dry joint somewhere or, possibly, failure of the sort of component that is fairly easily replaced ) and cosmetically very good, except for a scratch on one of the plastic side panels. It's built like a tank and weighs a ton!

AV hook-up is possible but using a custom din-type plug that was either peculiar to B & O machines in particular or Philips based models in general. Either way I don't have one but someone with the requisite technical ability could probably make one up.

If anyone is interested in this machine please respond.

Graham
Monday 23rd October 2000
8:07 pm U.K.

[email protected]

Video 2000 players - V2022 / V2023, Grundig 2x4plus

I have several of the above players in various states of repair. Some work, some dont. I will be going through them this week tosee what works and will make a list. In the meantime, if you'reinterested, please let me know. Unfortunately I dont have any tapesfor them, but I may be able to track them down.

Please also let me know how much you are willing to pay based on condition.

ThanksGraham

Jerry Baker
Monday 23rd October 2000
6:53 am U.K.

[email protected]

Help. I've got several films on Beta that I need converted to VHS.

Geoff Amabilino
Wednesday 18th October 2000
10:05 pm U.K.

[email protected]

Hi,

I have two Grundig 2x4 machines (one with remote control unit) plus over 100 used tapes (mainly VCC480). One of the machines works but probably needs new heads. I have one owners manual plus part of a service manual

I have given up on trying to copy the contents of the tapes to VHS,so does anyone want them? I am somewhat sentimental about them (I still think the picture is better than VHS!) and would like themto go a good home. I must ask you to pick them up.

I am in north London

Cheers

Geoff

ROLAND PICKETT
Tuesday 17th October 2000
9:46 pm U.K.

[email protected]

Andy, I've got a 1500 somewhere with a lace-up fault but the PSU is fine. Contact me if any good and I will dig it out.

Steve Skinner
Monday 16th October 2000
11:04 am U.K.

[email protected]

I'm looking for a working V2000 machine with AV outputs.

If anyone has one available please e-mail me with details and price.

Keith McHugh
Thursday 5th October 2000
9:50 pm U.K.

[email protected]

I've managed to get hold of a copy of the Grundig 2x4 Super's instruction manual if anyone needs help in getting one of these machines tuned in etc. Even something as simple as "record" is not a simple operation unless you've read the manual.

Mike Bennett
Thursday 5th October 2000
3:26 pm U.K.

[email protected]

In answer to Andy's question about Philips N1500 manuals, Mauritron Ltd can supply many out-of-print manuals including most Philips "VCR" models (N1500, N1700 etc.) and also most Philips / Grundig "V2000" models. Mauritron's site can be found at:

http://www.mauritron.co.uk

Mikey.Old VCR's and TV's at: http://www.oldtechnology.net :-)

Steve
Sunday 1st October 2000
7:19 pm U.K.

[email protected]

I am looking for a Grundig 2080 machine - dead or alive! Also service data, user manual or parts for the same. Thanks, Steve.

Andy
Sunday 1st October 2000
7:10 pm U.K.

[email protected]

Hi, does anyone know where I can obtain a service manual (photocopy would be fine) for a Philips N1500? I have one which has a PSU fault and I have about 20 tapes which I need to copy onto VHS!Thanks.

Marco Polak
Friday 29th September 2000
9:27 am U.K.

[email protected]

Hello again,

Again about the V2000 parts. A complete VCR would also be OK. I do not need a working VCR, defects is no problem. My location: TheNetherlands.

Marco Polak
Friday 29th September 2000
9:18 am U.K.

[email protected]

Hello!

Does anybody know where I can get spare parts for V2000 VCR's? And specially for a Philips VR2350? Thanks for the attention.

Marco Polak

Steve
Saturday 16th September 2000
4:35 pm U.K.

[email protected]

Wanted: new video heads for any V2000 machines. Thanks, Steve.

Iain Dyche
Saturday 16th September 2000
4:31 pm U.K.

[email protected]

After a Grundig 2x4 Video 2000 machine, must be good working order. Please email details including condition, price and whereabouts in UK.

airless_beef
Saturday 16th September 2000
1:49 am U.K.

[email protected]

Hi everyone!

Casandro
Wednesday 13th September 2000
11:18 am U.K.

[email protected]

Servus

I could get service manuals of most 80s VCRs.They include recorders from systems like VHS, Video2000, Beta, CVCand probably also VCR. Eventually I can even find them of earliermachines.

Servus Casandro

Steve
Friday 8th September 2000
10:55 pm U.K.

[email protected]

Has anyone got a Philips 2840 or similar 'second generation' Philips machine that they are prepared to let go? any condition considered or spares for the same. Thanks, Steve.

Wouter Suverkropp
Thursday 7th September 2000
2:40 pm U.K.

[email protected]

I'm looking for a manual (copies fine)for a 2034 Philips V2000 recorder.My 95 year old uncle has just bought one to watch his tapes! Ideally inDutch, but English would be fine too.

Yes, I know I work for Philips, but it's not so easy to find the rightpeople in an organisation with over 250.000 collegues....

Thank you for your help.Wouter

niels beune
Saturday 2nd September 2000
8:52 pm U.K.

[email protected]

hi, i have a problem with my philips vr2334, namely when i connect the power, all the lights goes on.... and out again, on.... and out again, as if you would supply power for 1/2 second and switch it of again for 1/2 second and switch it on again and so on.can someone tell me what the problem could be, and more important, how i can make it work again.thanks for replies, niels

Mike Bennett
Friday 1st September 2000
5:18 pm U.K.

[email protected]

Does anybody have any information or advertising literature for the Philips VR2025 front-loading machine. It's really a Grundig in a (very feable) disguise. Nobody I've spoken to has ever heard of it...

Mikey.

PS. Picture of said beast at: http://www.oldtechnology.net

Steve
Thursday 31st August 2000
6:36 pm U.K.

[email protected]

Wanted: any second generation Philips machine such as 2334, 2324, 2350, 2840 and 2220/2120 (portable). Also video heads for any V2000 machines. Thanks, Steve.

Jess & Dave
Wednesday 23rd August 2000
11:34 am U.K.

[email protected]

Lost two minds at V2000 in Stafford, if found please return to the above E-mail address. Where you there? Did you spot them floating around in some magical vortex, between here and some alternative reality. Get back to us on this one ....cos' we need our heads back to return to work. Can you believe they wouldn't allow camp fires!!

Wouter Bosma
Saturday 19th August 2000
1:31 pm U.K.

[email protected]

Hi, I got a Philips V2334 from my grandfather, but after installing the tv-screen stays black/white. I hear sounds from the tape for a few seconds and then it disapears. Does anyone has a clue what the problem is? I realy want to get the machine working because I have some tapes with old (originaly) 8 mm films on it from my grandparents and family. HELP ME!!!

Portal
Thursday 17th August 2000
4:57 pm U.K.

[email protected]

I am looking for a V2000 machine to buy ...

Gavin Chester
Thursday 17th August 2000
7:28 am U.K.

[email protected]

I had a V2000 briefly, (bought used and came DOA), and no more, I don't need a deck (my other half seems to thing 11 VCR's is too many) however I also got 10 or so tapes.They are not new and have been used, and as the machine never worked I've no-idea if what the label says is whats on them. Anyway there no use to me so if you wantr them make me an offer (Remember postage!!).

I don't guarantee the tapes even work, but there a mixture of lengths and brands. Mail me if you want to know more.

Steve & Julie
Tuesday 15th August 2000
11:25 am U.K.

[email protected]

We have got 2 tickets for V2000 at Weston park Staffordshire for Sat 19th & Sun 20th August, sadly we are now unable to make it.We are open to the best offer.2 Tickets - Cost £ 76 eachEither email us or call us on 01274 779 047

Keith
Monday 14th August 2000
6:50 pm U.K.

[email protected]

Does anyone have any knowledge of the Grundig 2x4 1600 ? I've just picked one up, but the only mode it will stay in is 'still frame' when I try to play/rew or ff the machine shuts down after about a seconds and the pause light flashes.

The tape does appear to be moving correctly but the tape counter seem to be stuck at 0000. How does the counter work in this model , does it rely on any sensors - if so could this be the cause of the machine's continual shut down.

All help gratefully appeciated,

thanks,Keith.

Paul
Sunday 13th August 2000
11:40 am U.K.

[email protected]

If anyone will sell me any working machine I will pay good money just email me and we can sort out as price

Eugen
Wednesday 9th August 2000
7:01 am U.K.

[email protected]

I have a Philips VR2020 in good condition, for sale. No AV adapter, no remote control, no tapes. If you are interested, pls.e-mail my. Eugen

Ian Wright
Sunday 30th July 2000
10:48 pm U.K.

[email protected]

I have a brand new set of heads for a Grundig 2 x 4 super or Super stereo video recorder. I purchased these heads as a standby relacement for my machine but I am now using VHS as my main format. I also have a Working N1502 machine with intergrated audio and video outputs. Please email me with offers.

pipelotti
Saturday 29th July 2000
2:38 pm U.K.

[email protected]

can anyone tell me where I can acquire some info about a V2000 type V2840, and maybe where I can buy this peticular machine

Steve
Saturday 29th July 2000
11:35 am U.K.

[email protected]

Has anyone got any of the following machines: Philips 2840, 2350, 2334 or Grundig 2080. Also wanted, a remote kit for Philips 2020. If so, please let me know what you want for them. Many Thanks, Steve.

Keith McHugh
Thursday 27th July 2000
7:18 pm U.K.

[email protected]

Does anyone have any info on the power supply of the Philips VR2320 machine ? (Circuit diagrams etc)

Thanks.

Jason
Wednesday 26th July 2000
10:11 pm U.K.

[email protected]

I'm desperately looking for a copy of the Bruce Lee film 'The Big Boss' on V2000 or Betamax to complete my collection. It can be converted to VHS but must be from V2000 or Beta versions.Can anyone help me please?! Excellent price paid if you can help me.Please email me direct.

Keith McHugh
Monday 24th July 2000
5:24 pm U.K.

[email protected]

Can anyone help me with a new fault I now have with my PYE VR2022 ?

I've just cleaned all the contacts on the 3 boards on the right side of the tape tranport - which seems to have cured it's fault of no/poor head drum rotation. But I've now discovered a new fault which appears to be DTF related. First the tape is running to fast with noise running through the picture and also why I think it's DTF related is that there are noise bars when the machine is in still frame or picture search modes (acting more like a VHS does rather than a clear picture).

I have pleanty of spare boards I can swap with a machine I broke up a few years ago but would like to know which board is responsible for the DTF rather than having to swap them all over.

thanks,

Keith.

LUCREZIA GALAXY
Sunday 23rd July 2000
12:06 pm U.K.

[email protected]

REMEMBER THAT MY PAGES ARE AT http://members.aol.com/lucreziagalaxy/index.htmlUNDER THE COLLECTABLES SECTION.

I HAVE A LATE MODEL PHILIPS WITH SCART SOCKET V2000 VCR. IF ANYBODY IS INTERESTED IT IS IN PERFECT WORKING CONDITION AND I WOULD BE WILLING TO RECEIVE SERIOUS OFFERS FOR THE PURCHASE OF IT WITH SOME TAPES.EMAIL [email protected]

Tim Dufton
Thursday 20th July 2000
2:54 pm U.K.

[email protected]

I am (like almost everyone else on this site) looking for a working Video 2000 player, as I have a number of tapes which I would like to review and record some stuff. I live in the North East of England...can anyone help?

Steve
Sunday 16th July 2000
5:06 pm U.K.

[email protected]

Wanted: heads for Philips 1700 series video. Also tapes or WHY for same format. Thanks.

LUCREZIA GALAXY
Saturday 15th July 2000
9:49 pm U.K.

[email protected]

I HAVE A VERY RARE PHILIPS V2000 MACHINE 2ND GENERATION WITH SCART SOCKET IN MINT CONDITION AND PERFECT IN APPEARANCE. I WANT TO FIND OUT WHAT SUCH A MACHINE WILL REALISE TODAY.

I KNOW IT IS RARE AND IS IN MINT CONDITION.

OFFERS ARE INVITED AND IF THE SUMS ARE HIGH ENOUGH I WILL SELL IT.

I ALSO HAVE A LARGE SELECTION OF BETAMAX TAPES. FOR FURTHER INFORMATION SEE MY PAGES AT http://members.aol.com/lucreziagalaxy/index.html

Steve
Saturday 15th July 2000
2:52 pm U.K.

[email protected]

I am looking for a Philips 2334 or similar second generation Philips/Grundig V2000 machine. Also V2000 test tapes and a remote kit for 2020 series machines.

Stephen Jones
Thursday 13th July 2000
2:24 pm U.K.

[email protected]

I'm looking for an NV1500 to play back some early video synthesis tapes.

Can anybody help, as near to Australia as possible.

cheers

Stephen Jones

André van Swaaij
Wednesday 12th July 2000
10:48 am U.K.

[email protected]

Hello,

anyone that can provide me with a schematic of the portable tuner VR2120. In fact I only need to know the DIN connector pinout. I want to use the tuner standalone to use it as tuner for my PC. Exchanging tuner+recorder for a PC-TV card is ok for me too.

Thanks,André

Mickey McKay
Tuesday 11th July 2000
6:45 pm U.K.

[email protected]

During my previous research on the politics of the Northern Ireland "troubles", I taped a number of documentaries. When I returned to the States I couldn't find a recorder that would play them. I understand there is a video recorder available in the U.S. that will play both PAL tapes and whatever we use and the cost is about what we would pay for a regular recorder. Anyone who knows where I can purchase one in the Delaware, Washingtin, D.C. area I would appreciate hearing from you. Thanks

shelly
Friday 7th July 2000
10:57 pm U.K.

[email protected]

hi alli know its abit off topic but im looking for a good working philips n1500 top price paid for good model can collect regardsshel

Andy Smith
Thursday 29th June 2000
8:09 am U.K.

[email protected]

I am searching the web for a quantity of twenty 'as new' V2000 VCRs for a customer. I realise that this is very much a long shot but here is a summary of the requirements:

a) Preferably front loadingb) all the same modelc) ideally capable of 19" rack mounting (width of units <19")d)PAL UK format

All help would be appreciated.

Lucie
Monday 26th June 2000
9:21 am U.K.

[email protected]

Does any one know how I can get a job, doing anything, at V2000? Aslong as it isn't cleaning out the toilets!

[email protected]
Friday 9th June 2000
6:17 pm U.K.

danielgriffin.@ntl.com

hi

Bernd Krebeck
Wednesday 31st May 2000
10:05 pm U.K.

[email protected]

Hi again,Searching User- and/or Service-Manual for Grundig video 2x4_plus machine! Scan would also be welcome!Greetings,Bernd

Bernd Krebeck
Wednesday 31st May 2000
9:48 pm U.K.

[email protected]

Hello,Searching for IR-Remote-Access-Unit for a >> Grundig video 2x4_plus (in good condition)<<,would exchange it with IR-Remote-Access-Unit for >>Grundig video 2x8 super(in good condition)<<!Sorry, only exchange, no selling, ... for now ... !!!

Keith McHugh
Friday 26th May 2000
7:23 pm U.K.

[email protected]

If anyone needs VHS or S-VHS copies made from old Video2000, Betamax, and soon Philips N1702 (VCR-LP) and Philips N1500 (VCR) cassette please feel free to get in touch. Also a EIAJ-1 1/2" reel to reel (b/w) up to 7" spools.

Lightning Raider
Friday 19th May 2000
6:40 pm U.K.

[email protected]

I have three Grundig V2000 2X4 machines in my attic and one manual.One machine is imcomplete, the other two seem fine.I cannot check them as I have no cassettes. I paid £10 each for them.If anyone wants them, they are for sale at the same price.I live in S.W. London.You will have to collect them or pay me to deliver.Leave me an E-mail if interested.

Lightning strikes......

ROBERT BALL
Thursday 11th May 2000
9:29 pm U.K.

[email protected]

Further to my previous message, I am also interested in other V2000 machines. I have a few machines already - and a lot of tapes! I haveservice manuals for the VR2020 and 2X4 (Electrical section).Will copy if cost met!!

ROBERT BALL
Thursday 11th May 2000
9:23 pm U.K.

[email protected]

DOES ANYONE OUT THERE HAVE A GRUNDIG 2X4 SUPER STEREO VCR THEY AREPREPARED TO PART WITH - IT'S A RARE MODEL INDEED! I HAVE ONE BUT I CAN'T GET IT WORKING AND WOULD DEARLY LOVE ANOTHER! IDENTICAL TO THE2X4 SUPER IN FEATURES EXCEPT STEREO SOUND, AUDIO DUB AND SILVER CASE.LOVER THE WEBSITE - IF ONLY I'D KNOWN ABOUT IT SOONER!

Steve Rowley
Thursday 11th May 2000
11:20 am U.K.

[email protected]

Has anyone got a remote unit (receiver module and handset) for a Grundig 2x4 Super? Also wanted for same: user and/or service manual, parts/old machine, V2000 tapes. Thanks.

Alan
Saturday 6th May 2000
5:28 pm U.K.

[email protected]

There's a head cleaning guid on PALsite at http://www.palsite.info/pcat_hclean.html

Walter J.F. Steenvoorden
Wednesday 3rd May 2000
1:02 pm U.K.

[email protected]

We hebben de tapes gekopieerd, bedankt voor de massaale reply's!

Martin Goet
Tuesday 2nd May 2000
9:01 am U.K.

[email protected]

Can someone tell me how I can clean the head off the portable V2000 (Philips VR2220) recorder.

Patrice
Thursday 27th April 2000
2:03 pm U.K.

[email protected]

Hi everybody,

I have 2 vr2334, 1 portable, but their heads are dead... And I have a vr2023 (all this in secam, I'm in france), with "new" heads (when I found it, it was almost new), but I have a little problem :It works perfectly, but in black and white until it is hot (it takes 15 minutes before the colors appears !) I remember that the problem appeared after I try to watch a film during a storm, and the electricity was coming, and going, and coming again... I know I should not do that, but I did ! :)) Any idea of which component is dead (and on which pcb ?)Or is it possible to find the scheme of this vcr ?

Thanks,Patrice.

Thomas Weinerth
Tuesday 25th April 2000
1:42 pm U.K.

[email protected]

Hi everyone,I am looking for a video head for my Philips VR2350 ! Does anyone have a spare one or does anyone know where I can get one? If required I'd buy a complete VR2350 -recorder (reasonable priced, of course). Does anyone know if the VR2350, VR2340, VR2324, VR2020 video heads are interchangeable?

James
Friday 21st April 2000
12:06 pm U.K.

[email protected]

Hi there - I'm looking for a Video2000 machine to play some old tapes I still have from the early 80's. If anyone's got a machine to see please e-mail me direct.

Thanks.

Dean Ratcliffe
Sunday 16th April 2000
11:11 am U.K.

[email protected]

Does anyone have the manual for the Grundig 2x4 Super GB. Can they email me a scan please. Its a DTF/servo problem I think. No picture, wavey lines. Then the head drum changes speed for a second, then I get top part of picture.

Any advice on the DTF circuit.

Dean

AntHi
Friday 14th April 2000
6:32 pm U.K.

[email protected]

Does anyone have a users manual for the vr 2020 -2022 and forthe grundig 2x4-2x8.Does anyone have a 22AV5530 AV unit for sale

Walter J.F. Steenvoorden
Friday 14th April 2000
9:17 am U.K.

[email protected]

Hoi, ik ben op zoek naar een eignaar van een goed werkende V2000 in de buurt van hilversum, ik werk voor een omroep bedrijf en wij hebben een klant die graag V2000 tapes wil over zetten naar VHS / Betacam. Vandaar dat wij de machine een dag willen lenen, Hier staat dan wel tegenover dat je in ruil voor deze dienst bij ons het het muziek archief ( > 250.000 titels), wat mag kopieren. De machine in kwestie hoeft niet op te kunnen nemen, stereo te zijn of perfect beeld te geven, zolang hij maar afspeelt!Voor meer informatie bel naar Ad Roland Media telefoon 035 6281111 en vraag naar Walter Steenvoorden

Keith McHugh
Thursday 13th April 2000
5:16 pm U.K.

keith_mchugh@my-deja.com

Anyone got a Philips V2000 for sale ? I'd prefer one of the later models. But would consider any machine with A/V outputs.

Thanks,

Keith.

LUCREZIA
Tuesday 4th April 2000
2:51 pm U.K.

LUCREZIAGALAXY@AOL.COM

IF ANYONE IS INTERESTED I HAVE A GRUNDIG V2000 MACHINE WITH SOME TAPES FOR SALE. ALSO I CAN TRANSFER FROM V2000 TO VHS.EMAIL ME IF INTERESTED

Rob Bestwick
Saturday 1st April 2000
3:11 pm U.K.

robbestwick@yahoo.com

I have an amount of pre-recorded v2000 tapes for sale , please e-mail me if you are interested , or send me your wants list.

previous new post   refresh  next