This connector is only found on a couple of models (including the
SL-C9). It is used to connect the video
to a changer unit.
These pin descriptions refer to the conections at the video end of the cable. This layout given is the full specification for this connector.
|1||Switched 12v - internally fused in the video, rated at 500mA.|
|2||Record ready - when low, the unit is in timer REC READY mode.|
|3||NOT IR-2 - remote control data for controlling the remote control microprocessor.|
|4||IR / NOT EXT - select signals for the remote control microcomputer.|